10 replies
by ajkamath Accepted solution
by rob miners Accepted solution
Fn+F5 Toggles among the built-in display, an external display, and simultaneous display on
both.
by ajkamath Accepted solution
by rob miners Accepted solution
You wouldn't have a CRT Monitor to test on by any chance. Some brands have a Control Center to setup an external monitor independent to the OS.
Other than that I am out of ideas. :|
by rob miners Accepted solution
checked the manual and noticed that the notebook has S-Video support. It may run off your TV. ;)
< having a play >
by ajkamath Accepted solution
by rob miners Accepted solution
by ajkamath Accepted solution
by rob miners Accepted solution
look for the onboard video first. I had the same problem with an acer the otherday but it would let me use a crt monitor.
Try pressing the lid switch just on the off chance that it sticks and thinks the lid is down so it turns off the display.
< from the manual >
External display does not work.
Check connections.
Press Fn+F5 several times.
Try display on another computer.
Likely Cause.
External display.
Motherboard
Doesn't look good.
by horus_k64 Accepted solution
Can you please check what connectors the Samsung syncmaster uses, that should be the first question.
Second of all, from what I can gather, check your motherboard, what type it is, and it is advisable to read the documentation from the manufacturer.
Also, if none of the above offer a solution, check from your vendor, HP, what the Specs are and what type of BIOS does it utilize.
I hope this helped.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending