Question Locked

I have a "bad" EIDE drive in a laptop

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

The other day the "big boss" brought his wife's out of warranty XP Pro laptop in and laid it on my desk. The note said, "It made a funny noise and stopped working, can you take a look", was the comment without much more detail. Don't ya just love it.

After very little time with the machine I determined that the drive was at fault. Clicking noise and no boot. I emailed him and he said "Replace the drive and get the info off if you can." While skeptical about the data retreival, I dutifully ordered a replacement drive and a USB/IDE/SATA adapter just to give it a try.

Got the USB adapter but the drive is backordered. I tried to take a look at the drive on my own XP Pro laptop with the adapter. Typically I have been about to make the second drive a slave and get what I need. After assigning a drive letter through Disk management I could not see any data although the drive was recognized as the correct make and model. Any thoughts on what I could try? Oh, by the way, the click is still occuring so all bets may be off. I tried chkdsk e:/r...file system is RAW. Also, clicking on the drive in My Computer asks if I want to format it. Thanks in advance.

Chip

9 replies

by robo_dev

Sorry to start a whole debate thread, but in this case, freezing the drive may help.

the clicking means the drive cannot find it's servo tracks..either the motor is not spinning up to speed or there is so much platter run-out that the heads can't read anything.

Put the drive in a ziplock back and freeze it for at least six hours. Taking care not to short anything with the condensation, plug the drive in when it's cold, and try to read it. I've tried this five times and it worked three times successfully.

by older mycroft

It might be better to find out from the BOSS just how much of the bad HDD was occupied so the OP knows how much data might need transferred.

Also - might be better NOT to freeze it (then attempt the file recovery) until the replacement drive has arrived or there is definitely sufficient free space somewhere to accommodate all this recovered data.

After the freeze it might be a one-chance-opportunity. ;)

by robo_dev

Set expectations LOW, LOW, LOW...

Let them know that the chance of getting any data on that drive are, at best, 1%, and that you're trying your very best, and have engaged a team of IT experts (us wizards at TR ;) )

by dhaffey

I have done this as well about a dozen times with luck on occasion.

by chip.ehlers

Hey guys/gals, Thanks for all the tips and comments, I had ask TR to emial me notifications but I never go any...I'll give things a try and let ya'll know...

by mr_t_wright

I have found that connecting a drive as an external HD rather than connecting as a slave is much more effective.... Connect as an external and if the window opens that ask you how you want to view the drive, click the view files open folder option. Then transfer the files to your local HD.. But as was stated by others, chances of recovering data based on what you have said are very low. Noises are bad.. Good luck

by oh smeg

That can rebuild the Partition Tables. There are many available but here is a short list of Propriety Applications if you can get the boss to spring for one I would recommend the On Track Option it's really good.

http://tinyurl.com/273ay5

http://tinyurl.com/rmvrv

http://tinyurl.com/yvrsl

http://tinyurl.com/yyk8cm

http://tinyurl.com/382vm

http://tinyurl.com/ynwnel

http://tinyurl.com/nc4kx

http://tinyurl.com/2wox7l

http://tinyurl.com/374d8b

http://tinyurl.com/djw6u

http://tinyurl.com/f73se

http://tinyurl.com/8bd3f

http://tinyurl.com/afu2j

While the last 2 are from the same company they are very different products. Win Hex should only be considered for use by someone who knows Hex Inside Out while Davory is a great cheap General Purpose Application.

Personally I prefer the On Track Option but it's anything but cheap. However because I use this type of software a lot it's paid for itself many times over by now, for a cheaper option Spin Rite from Gibson Research or Stella have both very good reputations by other TR members.

Col

by the scummy one

the read/write heads are notmaking it to the area of the disk with the data, however the chipset is fine (showing right make/model). I agree with RoboDev about trying the freezer trick. After that, there is likely not much that can be done without a data recovery service, as the mechanics inside the drive have failed.

This discussion is closed to new replies.