3 replies
by danomck Accepted solution
by mmccoy Accepted solution
by robo_dev Accepted solution
A common issue with external USB hard drives is that they do not get enough current to run, especially from the USB port on some laptops.
Therefore, they often include either a 'double headed' USB cable, or a USB cable that goes into a separate barrel-connector on the drive. In most cases BOTH must be used, or the drive will not start spinning.
A common issue in the old days was 'stiction' where the hard drive would be stuck and would not spin-up. The fix was to rotate the drive by shaking it in your hand, like a can of spray paint. This would break the bearings free so that the drive would start.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending