Discussion Locked

I have a toshiba dp1570

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This copier has a problem every time I go and put a new imaging unit in it it says i need to replace the imaging unit.
How can I fix this problem???

4 replies

by black panther

As it is a "photocopier" I would first read the manual. If it's under warranty still call the Supplier otherwise ring for a technician.

You could also try using www.google.com for some answers.

Techrepublic deals with Computer problems mainly not Photocopiers as such ( but I know that in IT you usually get lumbered with anything electrical as most people think all this equipment is IT's responsibility for some reason :) )

by ghimpe--

subtropicalmist, i hear ya, i had to fix a freezer just because it had a blinking LED, so my boss tought it was an IT job :wacko:

"This copier has a problem every time I go and put a new imaging unit in it it says i need to replace the imaging unit.
How can I fix this problem???"

Obviosly the problem isn't the imaging unit, but something that detects it (could be something as simple as a cold joint).

Try this electronic forum : http://www.electroforum.tk , post your detailed question and wait for an answear. I know at least one guy on that forum that deals with fotocopiers.

GooD LucK!

by hal 9000

This is something that is going to be happening to us a lot more often now that the new digital photocopiers can also be used as network printers and is really another specialized area all by itself.

But as the I suppose toner cartridge is what you are talking about here is concerned it obviously isn't the problem but there are some micro switches that if triggers that may have got bent on their mountings or are no longer working. You'll need to attack it with a multi meter to see that these switches are working and that their mountings have not got bent a bit out of shape. I saw this with a new Canon finisher unit which drove the tech mad with frustration as everything worked on physical test but the one switch was not closing when the unit was shut up. Several Techs latter they sent a query to Japan for a fix which didn't help anything and eventually the guy was reduced to measuring resistance across every switch whee the wires went into the circuit boards with the unit closed. Eventually he found the problem and all it required a a quick flick of the wrist to fix but I'm glad that it wasn't me doing that repair as it was really a nasty one.

There is another possibility as well and that is that the toner isn't being moved about properly have you shaken the cartridge around before fitting it as after it is fitted the unit should turn the drum and measure if any toner is being picked up if it isn't it will come back with the same error message and if the toner has settled away from the drum it will not be picked up.

Have you tried a different cartridge as well it is always possibly that you got a faulty one?

I don't know if that has been of any help but lets know how you get on.

Col

by kilia

i have a photocopier TOSHIBA DP 1570, and when i turn it on there appears a problem, it shows errorr c60, and i cant use any button, can anyone tell me what kind of problem it may be?

This discussion is closed to new replies.