14 replies
by waqas79 Accepted solution
by scalloway1 Accepted solution
If "c" is always the first character in the cell you could use this. It assumes that your first item of data is in A1
=IF(LEFT(+A1,1)="c",
Then type in what you want to do after the ","
by waqas79 Accepted solution
by scalloway1 Accepted solution
If you want to put the formula down every row but only show those with a specific letter then use this for text
=IF(+A5="p",C5&" "&D5&" "&E5," ")
If you want to add numbers together to get a total
=IF(+A5="p",+C5+D5+E5,0)
by jojo2000828 Accepted solution
I suggest to use SUMIF instead. Give me a sign if you need more help.
Sam
by gechurch Accepted solution
There are a couple of ways of handling this. One would be to use filtering (highlight your heading row, click the Data tab in the ribbon and click the Filter icon). You can then select the dropdown box on the heading of the column containing your c's and p's and untick the p's. Excel will now only display rows where the first column is a 'c'. You would typically use this in combination with the SUBTOTAL formula for your other columns. For example, if column B contained the total sale amount, using SUBTOTAL at the end of that column will show you the total for only the rows that are displayed (that is, only the rows that start with a 'c').
If you just want to sum a column or two and you do not want to hide rows as you would if you used a filter, then Jojo's suggestion of using SUMIF (or similar formula's like AVERAGEIF) is spot on. Lets say you have two columns; column A contains either 'c' or 'p', and column B contains the sale total. And you have rows 2 through 10 with values. You'd use SUMIF by entering the following formula in cell B11:
=SUMIF(A2:A10,"=c",B2:B10)
That formula says "look at column A for each row 2 through 10. If the value of column A equals c then include the value of column B in the SUM".
by waqas79 Accepted solution
Thanks again for reply, sorry for late reply from my side as i was busy. This help me a bit, Now i tell you the scenario of my data, I have a data consisting of several rows and ten (10) columns. I have made a performa on next sheet to get information of a single separate row. I have made 10 blocks in it as my row has 10 columns. My three columns have alphabets and 07 columns have digits. I only want to copy of that 10 columns data of a specific row in my performa blocks, but problems is that user will enter the data and he can't change the row number in formula, for this i have add a column to start and tell user to enter letter "p" in that row for which you want to print that performa. So help me that which kind of formula i can use which will automatic collect that row's information where user put "p". Or there is any other way to get information as i am trying a difficulty way or wrong way.
Regards
by gechurch Accepted solution
by waqas79 Accepted solution
by gechurch Accepted solution
by waqas79 Accepted solution
by gechurch Accepted solution
Ok, thanks for the clarification. As I understand it you have just one row of data that you ever want to display/print at any time (and you are just putting it on a second sheet so it can be formatted for printing).
That's fine, and there are a few ways to handle it. For all examples lets assume Sheet1 is where your rows of data are stored, and Sheet2 is where you want to display the particular data. On Sheet1 lets say column B stores first name, column C stores surname, column D stores address and column E stores city.
Method 1) Have the user manually enter the row number to pull the data from on your sheet to be printed. ie. have a label in Sheet2!A1 that says "Row # to print" and have the user enter the row number into cell Sheet2!B1.
You would then use the INDEX formula. This formula takes in an array of data (in our example, this will be Sheet1!A1:E10), a row number (this will be that value typed in to Sheet2!A2) and a column #. On Sheet2 click on the cell where you want the first name to be displayed and enter the formula "=INDEX(Sheet1!$A$1:$E$10,$B$1,1)". That formula says "here's my array, now return me the value of column #1 in the row I specified in cell B1 on this sheet". Now click wherever you want the surname to be displayed and enter the formula "=INDEX(Sheet1!$A$1:$E$10,$B$1,2)". You'll notice that's the exact same formula, but the last value is a 2 now, meaning "grab the value of column #2 in the row I specified". Or in other words "return the value in the surname column". Continue on like this until you are pulling in every column of data.
Method 2) is a similar approach to above. This time though we are going to have the user type a 'p' in column #1 on Sheet1 for the row they want to print. We will then write a formula that looks for the row with a 'p' in column #1 and will read the values for each column in this row.
To do so, enter the following formula on Sheet2 in the cell where you want the first name to appear "=VLOOKUP("p",Sheet1!A$1:$E$10,2,FALSE)". That formula says to Excel "Look for the value 'p' in the first column of the table Sheet1!A1:E10. Once you've found the row with the 'p', return the value in column #2 of that row". Obviously to return the surname you'll change the formula to "=VLOOKUP("p",Sheet1!A$1:$E$10,3,FALSE)" (to get the value of column #3) and so on.
There are a few other strategies, but the ones I can think of are basically just variations of the above.
by waqas79 Accepted solution
Thank You very much! its help alot. Both methods are good. But i will use 2nd method as it fulfill my requirement 100%.
In the same scenario please tell me if it possible I can also be able to copy the heading of any column of that specific in which the data entered by user.
by gechurch Accepted solution
Grabbing the column headings is simple since you know exactly which cell they are in. Your headings will all be in the first row of Sheet1, so all you need to do is hit "=" then enter the cell containing the heading.
For example (assuming the same layout of columns as I posted earlier) to grab the heading "First Name" you'd use the formula "=Sheet1!B1". To grab the surname heading you'd use "=Sheet1!C1" etc.
This discussion is closed to new replies.
Trending Software posts
Sort by Trending