Discussion Locked

IBM PC365

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 2 IBM PC 365, PII 200's. The bios setting on 1 of them will not allow me to install a network adapter. The other is fine & does allow for a nic to be installed. I have upgraded the bios & checked the IBM site for solutions. No luck. Any suggestions. Thanks in advance for any help offered.

5 replies

by addison99

You say the bios wil not allow you to add a NIC to the PC.

Exactly what error do you get, or does it just not detect the card. If the latter then I would say the nic is faulty.

Have you checked the bios is set to a plug and play bios.

If this does not work get back with more information

by kach

Since you have upgraded your bios, I would check to make sure you have proper settings. Compare the settings on both computers to see if Bios is the same as the one that you were able to install the nic to. If settings are the same I would try switching the nics to determine if you have a bad nic. If so you will need to replace. If problem is not in the nic or bios settings, and nic is seated properly you may have a problem with the motherboard.

This discussion is closed to new replies.