Discussion Locked

ICS

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a problem and I am hoping you can help me with it.A friend of mine asked me to come over to his house and set up ics on his Win ME system. The other system that he wants to share his cable connection via cable modem with is a Win 95
machine. The host (WIN ME) machine has 2 nics in it , one for his lan and one for the cable modem. Does anyone have instructions on setting up both nics on the host and the nic on client machine. I already have them set up as follows: Host nic to cable modem is automatic for dhcp, host nic for lan is ip: 192.168.0.1, mask:255.255.255.0, gateway is ip issued by cable company to host. No dns and no wins. How should I set up the
TCP/IP->Internet Connection Sharing and how should I set up the client. I have the client on the 192.168.0 network now and can see it from the host in network places. When I enable the ics , I totally loose internet connection on host machine. Can you please step me through this. Thank you for any efforts you put towards this issue.
I've printed up all the material from MS Knowledge Base and it is not as detailed as I was hoping. I've set this up before on 2 Win98 machines and had no problem. I don't know if WinME is different or if I am missing something.

9 replies

by parbo

I have a different approach that i use at home. I bypassed ICS on my 2 Win2k systems. the 1st has 2 Nics in it one for the cable modem and one for the local network. This is a peer2peer connection to the portable. I have specified the ip settings for the peer2peer connection and additionally on the portable i specified the DHCP supplied ipaddress as the 1st DNS and the real ISP DNS as the 2nd DNS. gateway is also the DHCP supplied ip address. Maybe this could also work for you.

by mphoffar

Without getting real wordy, go check out www.winproxy.com. Although you're not using their software, their help files are pretty clear as to how to set this up.

I think in your case though, you want to plug the cable modem's patch cable into the cross-over on the hub (it's either the very left or right on the hub) and the two machines anywhere else, except next to the port where the cable modem is plugged into.

At that point, your host should setup a stack with 192.168.0.1, 255.255.255.0 and a gateway of 192.168.0.1 You can add the services DNS addresses if you wish (a winipcfg should be able to tell you what those are). The other machine should have an IP of 192.168.0.2 and a gateway of 192.168.0.1. If you want to enable DNShere, you'll want to enter 192.168.0.1 and then your DNS from the service.

Good luck to you

Mark

by dcosgrove

I personally highly recommend using a cable/dsl router. There are several reasons. First, both machines don't need to be on. One or both machiens can be running, the router doesn't care. Second, you have a built in firewall, no computer is actually on the net, only the router. Many people claim to hace success with ICS, I do some small network installs professionally and have made the decision to use the routers. Winproxy works but it can be tough to get e-mail clients configured among other things.

by yagar

Her are bits of info here at Tech Republic

Drill Downs

Sharing an Internet connection on a home network
Feb 7, 2000
Ed Engelking

Setting up Internet connection sharing in Windows 2000 and 98SE
Apr 2, 2001
Debra Littlejohn Shinder, MCSE

Discussion Center: Discussion

Discussion: Sharing an Internet connection through Windows 98
Date: 4/14/00

Good Luck

This discussion is closed to new replies.