I’m using Windows 2000 Professional 2195
I have ICS installed and can get other clients connected via my HUB to access the Internet fine, so ICS is working fine.
The RAS user can ping 192.168.0.1 so that connection is fine. I had to manually set192.168.0.1 to be the default gateway on the client computer. The dial-up user can now resolve net names fine to ping them, but no replies are received.
I’m sure its a routing issue, or possibly I need to subnet?
Setup details are as follows:ISP/aDSL Modem: dynamic IP
LAN Card: 192.168.0.1
RAS server/my modem: 192.168.0.10
Remote modem/client: 192.168.0.15
Routing
Client
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.15
(before I put this manual entry into the routing table, no names could be resolved to IP)
Server
192.168.0.15 255.255.255.255 192.168.0.10 192.168.0.10
192.168.0.10 255.255.255.255 127.0.0.1 127.0.0.1
(these were automatically added in by RAS)
Is it possible to share my net connection with this dial-up user?
Thanks heaps to anyone who can help me with this one. I’m stumped.