Discussion Locked

IIS/IP Bind

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a web server with 3 NIC cards

NIC1: 23 IP addresses mapped ?class c?
NIC 2: 1 IP address
NIC 3: 1 IP Address

Running W2k+SP1+all post SP1 Fixes

On this machine there are 23 domains each one of them using an IP address from the NIC 1, now when I map a new IP address to the NIC1 as IP number 24, and go to IIS I get this error:

Internet Services Manager

? Error connecting to server name
Not enough resources are available to complete this operation
Do u wish to continue to attempt to connect to it in the future??

In this stage if you click yes or no it wont make a difference because you wont be able to manage or see the ISM, so that you wont be able to create a new domain or control the other existing domains, at this stage the IIS will still be running and serving the other 23 already created domains. If you remove the newly added IP address from the NIC you will be able to get back everything to normal accessing the ISM and control the domains.Keeping the newly added IP address and rebooting the machine will cause the www and ftp services not to start unless you remove the newly added IP address on NIC1.

This way I cant add any new domain to my IIS server and I was hoping that SP2 might fix my problem but it didn?t also.

Any ideas?

5 replies

by churdoo

Well I can't tell you how you can add another IP to this box, it sounds like you may have hit some internal limit. I can tell you, however, that you can still add your other domain(s) without adding IP's. So unless there's some specific reason that you want each domain on its own IP, you can stack multiple domains on an IP by specifying the host headers in the domain properties. If you go into a domain properties box and hit the 'advanced' button next to the IP address, you go into a dialog where you can specify the host headers that the browser will be requesting. Edit the existing IP entry in that dialog and specify the host header, i.e. www.domain1.com. I also typically add a second entry on the same IP here to accomodate requests for domain1.com (without the www). You can then go into the properties for other domains and stack them on the same IP by specifying thier host headers, www.domain2.com, www.domain3.com, etc. This is how IIS keeps track of multiple domains on the same IP and will work for any browser that is http 1.1 compliant (I think IE 3 and Netscape 3 and above).
Your version of IIS (5.0 comes with W2K) supports virtual FTP as well, although I don't knkow the exact steps for setting up the virtual ftp, itshould have similar functionality for conserving IP's.
Hope this is useful.
--Charlie

by nawar75

Thanx for the reply , I know the host header way but I cant use it , I need each domain to have its own IP

by infosec (ralph)

Quick question - does the 24th IP belong to the "class-c" that you're mapping or is it of a different subnet?

NIC 2 & 3 have SEPARATE subnets (i would hope), right?

What are the specs on the box you're doing this on.....?

This discussion is closed to new replies.