Discussion Locked

Incomplete browse list at win 2k work.

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am using a windows 2000 workstation in a netware 4.22 environment. I have several workgroups defined to use ms file and print sharing services, but at the w2k station I have eratic results when attempting to browse the network: sometimes only one workgroup will be displayed along with a fraction of the member workstations (mostly windows 98). Could this be a problem with the master browser, because I also get errors regarding the backup list generated by the browser service? I have seen that Microsoft acknowledges the problem. Any ideas? Thanks in advance.

7 replies

by jaystar

I've seen this problem a few times, however it was mroe with 95/98 machines. I am surprised that they are not having the problem also... Make sure your groups all conform to the netbios naming standards. That means no spaces in your workgroup names. Even though win 9X will allow you to enter them, it will cause problems with browsers (including win2000).

Hope this helps.

by 1ronman

We had the same problem where I work. We have several differant subnets. Some of the subnets did not have a computer assigned as browse master (Browse master was turned off by default on all the 9x boxes on that subnet). Once I enabled browse masterfor one pc that was always powered up in the file and print sharing settings in the network settings, my problem was solved. Browse master will affect the performance of the box selected, especially if its a low horse power one.

by james_randy

If you are still tackling this problem, perhaps you should consider calling your local super-hero.

This discussion is closed to new replies.