5 replies
by churdoo
The point of a mirror or any other kind of storage redundancy, is to protect you from a hardware failure, not software. A mirror will not keep software from dorking your system; it would just dork both drives in the mirror set equally as well. :-) So with a mirror set, as far as the OS is concerned, it is one drive, and you apply the same precautions as you would for a non-mirrored drive.
If you're asking about general precautions, then I would say this. The point of the server is to sitthere and serve. The more you put (install) on the server that may clutter its main tasks, then the more you are putting yourself at risk for some sort of software corruption. Before installing any utilities on the server itself, ask yourself if you really need that installed on the server or might it be more of a hinderance to the normal operation of the server.
Secondly, don't risk filling up the main OS partition (C-drive, in most cases). Most OS's, NT included, don't react very well to the main OS partition running out of room. So if you do determine that you need extra utilities installed on the server, watch the C-drive Free space, and consider putting stuff on another drive if available.
Thirdly, (not necessarily in order of importance) make an ERD before you add something to a known-working server (see the rdisk documentation) so that if something does get hosed in the install, you can reboot from CD or an NT boot floppy set and you should be able to restore your systemto a state prior to the install.
Hope this helps!
--Charlie
by matt5968
by jyimcse
by matt5968
by matt5968
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending