Question Locked

Installation of a network printer for an RDC client on VPN

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am working at home via RDC and VPN connected to my office remote hosts (WinXP, WS2003). I need to print on my home network printer (HP LJ 1022n), that is not connected directly to my home PC. The problem is that the printer's IP address belongs to another subnet (e.g. 192.168.123.9) than the host PC (e.g. 192.168.1.8) the drivers are to be installed on - so the standart HP installation software just can't recognise this network printer. Is there any solution?

3 replies

by tigerbite2007

Use the net use command, to map a printer to bind it to your local lpt port before you connect to the server. you may need to share your local printer first also.

ie net use lpt1: \\yourcompname\printshare

http://support.microsoft.com/kb/314499

The server will be tricked into thinking there is a local printer on your machine.

by sakir_926

how do you network printer 1022n instaltion image and text tips

This discussion is closed to new replies.