Question Locked

Installation of Linux on P IV, 3.4 GHz, with SATA HDD

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to install the Linux Red Hat 5.2 on above mentioned system through cd rom. I have tried expert and simple mode but invain. during initialization every thing looks ok except the following

hdb: non-ide drive, CHS=0/0/0
hdb: invalid Geometry,:0 physical heads?

these messages displays and at the end of initialization it gives the message

vfs:cannot open root device 08:22
kernel panic:vfs:unable to mount root fs on 08:22

and installation process doesnot proceed can any one help me what to do although i have seen many forums which shows bios changes in device configuration from enhanced to Legacy and i also used the the command
boot: linux all-generic-ide noapic nolapic

but it doesnot work. help me

2 replies

by ron k.

I changed the BIOS hard drive settings from RAID to automatic or vice-versa. I can't remember exactly but there were three choices. One of them worked.
To my unpracticed eye it looks as if you need a SATA driver, if you have SATA drives.

This discussion is closed to new replies.