4 replies
by gharriso Accepted solution
by hal 9000 Accepted solution
If you add it as the Master the computer will think that it is the Boot Drive or at least the drive with the directions to the Boot Files and since they are not on the HDD it will not boot.
Col
by gharriso Accepted solution
by hal 9000 Accepted solution
As I'm not sure how the 975 Boards work when you have instigates any form of RAID Array.
I've previously had all SATA Connectors used as stand alone drives but I've never attempted to add to a RAID Array probably because I always build too big and have never as yet run into that problem.
But at a Guess I would say that there is something in the RAID Setup before the system boots which if I remember correctly is [b]CTRL A[/b] to get into the setup option after POST.
I hope that is of some help though I'm personally not sure one way or the other.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending