Discussion Locked

Intellipoint 3.2 in Windows 2000

0 helpful
36 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After installing Intellipoint 3.2 on my Windows 2000 SP1 workstation and performing the first requested reboot finding error in event viewer of:

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 2/3/2001
Time: 1:14:16 AM
User: N/A
Computer:
Description:
The following boot-start or system-start driver(s) failed to load:
Mouclass

along with no mouse pointer and a prompt of "new settings, please reboot...." message popup. After doing 2nd reboot to respond to the message popup, and restarting the workstation finding the mouse pointer return but the "pointer speed" and "click lock" and "orientation" settings all greyed out and unavailable in Intellipoint. After resetting the mouse settings to the correct mouse of "Intellimouse with intellieye" and choosing the default button assignments and then either relogging out of the workstation and logging on as another user or restarting the workstation all settings are lost and all settings must be reset. Uninstalling Intellipoint 3.2 returns the mouse settings to the default Windows 2000 mouse driver with all settings available and retained. Why are Intellipoint settings all greyed out for pointer speed and other settings in Intellipoint 3.2 for Windows 2000?

Thanks,

Carlos.

36 replies

by iith096

Thanks Rager,

I already tried that. The only thing that even comes close to the problem I am having is a knowledge base article on installing version 2.2 of intellipoint on W2K. I am installing version 3.2. Thanks for trying.

Carlos.

by pault

Again i have never used W2k but this seems to be a common problem that user are having. This is my solution and i dont even know for sure if im right, So please let me know if this does it.. W2k is trying to load 2 sets of mouse drivers, both different. It is my opinion that you need to uninstall the standard mouse drivers before installing the Intellipoint drivers... Hope im right. good luck.

by iith096

Paul,

I thought the same thing. However, when you do install the intellipoint software it "overlays" on top of the basic mouse driver in Windows 2000 and just "enhances" the options available to you in controlling the mouse. Here is the weird thing. I installed the intellipoint correctly once before and then just recently tried using a Logitech mouse with its drivers and after not liking the mouse and the drivers, I uninstalled it. I even went through the document on the Logitech site about manually removing the drivers out of the registry as well. Yet, even after all of that, I am still not able to "reinstall" the intellipoint drivers. Thanks for trying.

Carlos.

by rager

Here's a tool _I find helpful. It's RegCleaner from Juoni Vuorio, www.jv16.org . It does a very nice job of "listing" many things in a machine.
I'm running 98orig and ran a Logitech Wheelmouse before installing the M$ optical. I can't say I know-all, but fooling with the optical(3.2), I recently uninstalled it. On reboot I was informed vmouse.vxd was missing, (and damn, another, I think it was mouse.com.... which I'd remmed out of my config.sys) Anyway, rebooting, I assumed, would have at least brought up the native Win support for a wheelmouse, so I was a little bewildered to get the boot errors. "any key"'ed my way into W98 and had to use the keyboard to install the M$ Opt software off the cd.
Hope something helps.

by iith096

Rager,

I am not sure if this would work with the registry in Windows 2000. I have read on newsgroups about the danger of installing Logitech mouse drivers and how they can either make a pc configuration either unstable and/or cause it to fail. I guess I got a first hand experience of that. Thanks for trying.

Carlos.

by richeyost

Hello all if you notice that when you installed your w2k svc pack it reminds you that if you add or subtract any componets that you need to re-install your svc pack. Also there are a couple of recent updates to sec that also require that you re-install. I have intellipoint 3.2 running on my W2K server and have had no problems. Hopefully yours will be working soon.

Rich

by iith096

Rich,

Here is the real mind twister. I had Intellipoint 3.2 running just fine on my system once before. (should have left well enough alone!) I recently tried out a Logitech cordless mouse man wheel mouse and it's Mouseware 9.x drivers. (in hindsight a major mistake knowing how buggy the drivers can be) After uninstalling the mouse and the Logitech drivers the mouse properties in Intellipoint started with the "greyed" out options almost immediately. I then uninstalled the Intellipoint software and then tried to reinstall. No dice. Same problem. I then figured maybe the Logitech uninstaller did not remove all the mouse filters and drivers off the drive and left garbage in the Registry. Following a document on the Logitech site about manually uninstalling the Logitech drivers, I followed it to the letter. Removed all incorrect entries in the registry utilizing both the Reged32 and Regedit tools. I then downloaded a "fresh" copy of the Intellipoint 3.2 software from the MS site and logged on as Administrator (to rule out a rights issue) and tried to reinstall the software. Still no dice. Same thing as before. I sure there is a single Registry item or entry that is holding up the whole thing but I am not sure where it would be. Hopefully there are some MCSE's out here who might know. Thanks for trying.

Carlos.

by freddo frog

Why are you trying to use the Intellipoint drivers?

On my workstation running W2K Pro with an "MS Intellimouse with Intellieye", Windows picked up the device, loaded the correct Windows 2000 drivers and the mouse worked perfectly with full functionality & configurability.

Like you virtually every time I tried to load the Intellimouse drivers on any similarly configured systems, it would cause errors and the mouse would not work. So I stuck with the Win 2K drivers, which as I said worked perfectly.

Count yourself lucky that the mouse even works as NT doesn't support the Intellimice at all (it will only work as a "standard serial mouse").

LOL :)

by iith096

Kinko,

Glad to see I am not the only one having the problem which indicates that it is a true compatibility problem. Hopefully, MS will put up a Knowledgebase article addressing this issue soon.

Right now I am using the native Windows 2000 mouse drivers. But, just like all of us who work with computer systems in our jobs, I want to know "why" this is not working. As you can see in Rich's answer rating above, I had successfully installed the Intellimouse drivers "before" I upgraded toService Pack 1. After applying the SP1 patch the Intellipoint software "still" worked. It appears that after installing and then uninstalling the Logitech mouse drivers is when the problems began. I believe either a critical registry setting, fileor driver was removed inadvertently by the Logitech uninstaller. What that file or registry entry is the problem. I will keep on researching the problem. Thanks for trying.

Carlos.

by arg cio

Here's one idea.. grab a program that tracks changes, and allows you to "return to a previous" configuration. Grab your Logitech, and INSTALL IT AGAIN!! (ARGG).. all changes (files, registry, etc.) will be noted by the program, and then you can remove all files, registry entries, etc. and then install the intellimouse, and use standard drivers, and then install the intellimouse drivers.. good luck, and happy clicking.. :)

by iith096

Argcio,

I used this document from the Logitech site to find all the entries of where the Mouseware 9.x mouse software installed it files and how to remove them. Check this out: http://www.logitech.com/cf/support/1560.cfm

I followed this to the letter and it did work in terms of finding and uninstalling the Logitech drivers but, after doing all of this and then going back and reinstalling the MS intellipoint drivers, the same options are still greyed out. Your idea of the Ashampoo uninstaller 2000 software is a good idea. Unfortunately, I have already returned the mouse so I can't try it again. Thanks for trying.

Carlos.

by robinbobin

Why don't you try an old Windows 95/98 trick and go into safe mode and remove the mouse in the system properties/hardware/device manager tree and any other mice you see. Reboot. It should recognize the correct mouse and driver.

by iith096

Thanks for answering. But, Windows 2000 is able to identify the mouse correctly and install the basic drivers. The problem is when I try to install the Intellipoint 3.2 drivers. Thanks again for trying.

Carlos.

by iith096

Doesn't really apply to me. I did not upgrade my workstation from Windows NT to Windows 2000. I did a clean install of Windows 2000. Thanks for trying.

Carlos.

by rager

Another small bit...Carlos. Again, I have rather small experience. But a note on the (Logitech) mouse drivers in general. And I think I've had some Genius mouse software on this install (W98 orig).
I noticed, before I installed the M$ opt mouse/software, my dosstart.bat "grew" space. I'd look at it every 3-4 days, and wtf, space was somehow being added to the file, even after deleting the space several times. Fwiw, I haven't had that problem since.

by iith096

Rager,

I am not sure I follow your answer. I agree that the Logitech drivers installs alot of stuff all over the hard drive including the Registry. But, I went through the normal uninstaller as well as manually uninstall all the left over drivers and registry entries that the uninstaller missed. Yet, reinstalling the intellipoint 3.2 still left the options greyed out. Thanks for trying.

Carlos.

by jcurl

carlos, I would bet me left arm that Q256233 is the correct answer. it doesn't fit your scenario to the letter, but in my experience, knowledge base articles rarely do. there's enough similarity between your issue and the article that I would certainly give it a try.

j peake, MCSE

by jcurl

especially after seeing your comment to Rich in 'answer 4' where you state things were working but then you installed Mouseware 9.x. That is straight out of the KB article.

by iith096

Jeremy,

The knowledgebase article is partially related to my problem. My pc has never had NT installed on it and I did a clean install of W2k. I tried using a Logitech mouse and found that some of the options in Intellipoint 3.2 were greyed outwith the Logitech mouse plugged in. I then figured (bad move!) to install the Logitech Mouseware drivers to see how much better they would be compared to the MS Intellipoint software. After installing the Logitech drivers, the control panel appletfor the mouse now brought up the Logitech mouse options box instead of the Intellipoint version. The mouse worked fine and all settings remained after rebooting. After finding the Logitech mouse not that great, I uninstalled the Mouseware softwareincluding the mouse and reinstalled the MS mouse. The control panel updated itself and after rebooting now brought up the Intellipoint mouse control panel. But the options were greyed out. I figured, "no problem", just try to reboot with the MS Intellimouse and the software should identify the mouse and re-enable the greyed out options. Surprise!!! Options were still greyed out. I then figured maybe just uninstall the Intellipoint drivers and reinstall them with the MS Intellipoint mouse plugged into the pc. Install processed. Yet options still greyed out. As you can see, my problem is kind of related to the knowledgebase article you referred to but not entirely. I will keep on researching. At this point, I could care less if I am not able to use the Intellipoint drivers or not. I am able to use the native W2k mouse drivers without any problems. I do miss the "universal scrolling" feature of the Intellipoint software though. Came in handy when using a non-Microsoft product or an older program. I just want to know "why" this is not working. That is partially why I posted such a high point value to this question. I want the answer!!!!!!

by emcs

Event 7026: Serial mouse failed to start, but you have a PS/2 mouse?
If this happens to you, you have a serial mouse driver installed, without having a serial mouse.
Use Control Panel / Devices to disable it.

Good luck.

dennie

by iith096

Dennie,

That error you see above is what I received after I finished the install of Intellipoint 3.2 and did the first requested reboot. I also lost the mouse pointer as well. I also saw a warning about a "new hardware please reboot to complete......". After I rebooted the workstation the mouse pointer returned with the pc installing the default mouse drivers as viewed in Device Mgr. So, I am not sure how or why a serial mouse driver would come into play in this situation. Thanks for responding.

Carlos.

by rager

This just another comment... I was just using/investigating the Intellipoint Troubleshooter. (specifically, I told it my wheel wasn't working correctly).
I was prompted to open the program "I was having trouble with", then tic "OK". The troubleshooter then listed all the open programs I had. (I might be bobbing for apples with my nose!) This ability, to repair, suggests something, I don't know, something perhaps intrusive.
Using MS System Information, under Software Environment, Drivers, System Hooks; I've got 4 hooks listed. Hook Type: Keyboard, hooked by: Point32.dll, Application: POINT32.exe.

Hook Type: GetMessage, hooked by: Msh_zwf.dll, Appl: POINT.exe.
Hook Type: CBT, hooked by: Point32.dll.
Hook Type: Mouse, hooked by Point32.dll.
There's also a .dll, the name of which eludes me, that is sort of a _master, listing other .dlls within it. If I remember it I'll post.

by iith096

Rager,

I have uninstalled the Intellipoint software and just running the default mouse driver. You have brought up a rather unique angle to the problem. Perhaps, there is still some "logitech" driver or dll out there that I have missed while cleaning up that is still blocking the intellipoint driver. As a test, I recently upgraded my brother's Dell computer which is very closely setup as my own computer, with Windows 2000 SP1. With his permission, I will see if I can install the Intellipoint 3.2 drivers on his workstation without getting the "greyed out" options. This would prove in theory that the problem is related to the install of the logitech mouseware drivers and not with the Intellipoint software itself or the service pack update on the OS. I will investigate and give an update. Thanks for continuing to work on this problem.

Carlos.

by kgosnell

Considering it crapped out already, try removing the mouse in the device manager, and letting Windows install the default drivers and see how it operates, and Windows allows you to configure it after it installs it, also a little item , I had a new mouse crap out, and started to emulate hangs, once the mouse was replaced , no problem. Simple but effective.

by iith096

I have already did this. My mouse is running with the basic Windows 2000 mouse drivers without a problem. My question is why are the Intellipoint drivers not installing correctly. Thanks, for trying.

Carlos.

by kgosnell

Have you contacted the contractor that writes the drivers for intellepoint? Microsoft uses jobbers for this, and if they don't have a set specifically for 2000 , perhaps they will correct the oversight, or work up a patch , unlike MS who depends on the users to provide the fixes for the platform, the fact they have default drivers that operate suggests there is a set of proper drivers for the 3.2 setup, the trick is to find the correct jobber to get the fix,, If you twist Microsofts arm they may provide it, likely it is a company within a company, and will turn out to be a set of numbers rather than a proper URL, to protect them from user rage, ha,ha, yeah like we will shoot'em with a Jave twister. I wish you luck.
Kyle

by iith096

Kyle,

That is an direction I have not explored. I will try to find out who actually wrote the drivers.
Thanks for answering.

Carlos.

by montea7

When installing Intellipoint Mouse, do not use setup.exe ....use the Intellipoint setup as setup.exe win2000

by montea7

One clarification at least the above worked with Intellipoint 3.0 and for you I hope it is still working in 3.2

by iith096

That is an idea. However, I am kind of tired of the whole idea. I guess I will cut my losses and leave well enough alone. Thanks anyway.

Carlos.

by brett_phipps

This is a shot in the dark, but assuming you've followed Logitech's stuff to a T, we have to assume that there is something else about your system that has been changed that Logitech might not bother telling you about. This made me question what kinds of other things might be updated by the install program. I believe the Intellipoint install program uses some information from the Win2k driver.cab. I wonder if the Logitech installation tried to update/modify this driver.cab file, rendering itunusable for the Intellipoint software. If I'm right the update date for this file on your drive will match the installation date of the Logitech mouse. If that is the case you should be able to find this file on your CD and replace the copy on your hard drive, do a reinstall of Intellipoint and be good to go.

by iith096

You probably have a valid point. It is definitely either a registry key or a file that is still on the hard drive and causing the failure. The question is what key or file is it? I think I will leave well enough alone and consider myself lucky the mouse works as well as it does using the "stock" Windows 2000 drivers. Hopefully someone else will read my tale of woe and beware of the Logitech software. Thanks for answering.

Carlos.

This discussion is closed to new replies.