Question Locked

Internal 100MB zip seen as floppy

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Had to migrate a zip drive from an ancient 98 machine to a new XP SP2, with an Intel 101 board. The zip drive has the IDE connection for the floppy interface. It doesnt show up as a zip drive...just as a floppy. (tried a zip disk, but didnt read either)

Have used the 4.0.2 IOWare update.

Does this board just not support Zip IDE?

I checked the BIOS and Zip emulation is set to floppy. What do I need to do?

IOMEGA no longer supports the 100Mb atapi/ide!

2 replies

by thechas

Are you sure the drive uses a floppy drive interface?

As best as I can recall, all of the internal Zip and Superdisk drives used the standard ATAPI IDE interface.

The only high capacity system I recall for the floppy interface was the near vapor-ware floptical drive.

Chas

This discussion is closed to new replies.