3 replies
by fanku
I assum that u can access internet on ur server.
so now lets leran how to setup internet on other PC.
on server click on ---> Start-->control panel--->add/remove programs--->windows setup--->internet connection sharing clik on it.
and follow the next instruction.
and make sure that ur server and 3 work station in one IP series.
its very easy...just spend few mins with fresh mind
by rindi1
Use the Routing and remote access service of your windows 2000 Server (Control Panel, Administration Tools). The Modem will have to be in your server. There you can setup NAT (Network Address Translation). When you've set it up correctly, you will be able to connect to the internet from your PCs. You'll have to set up your network cards of the Windows98 PCs with the address of your server's network card as the "Gateway" address. For details on how to correctly configure RRAS you should have enough examples when you open the appropriate help Topic.
Good Luck,
rindi
by chanmkr
for this first check in win2000 in windows componet in add remove program internet option
internet connection sharing
give i/p to server 192.168.0.1
share internet connection by right clicking and share option
On the client side
give i/p address in range og 192.168.2 to 192.168.0.10
give subnet mask as 255.255.255.0
default gateway as 192.168.0.1
DNS SERVER AS OF ISP
IF Y R USING VSNL THEN IT IS
202.54.1.30
202.54.1.18
IN IE SETTING IN CONNECTION LAN SETTINGS AUTOMATIC DETECT THE SETTINGS
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending