Discussion Locked

Internet Mail Service -W2K to Exch 5.5

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a win 2000 box configured to use Internet E-mail and a dial-up connection to get e-mail from an Exchange 5.5 server. When a dial up connection is made I recieve a message that server xxx.xxx.xxx.xxx cannot be found. If I go to DOS I can ping the server no problem. I did notice that the subnet mask is 255.255.255.255. all win98 clients have 255.255.255.0

4 replies

by xpertdragon

Having matched Subnet mask settings across the board is important. It is good that you noticed that, and should be a reminder to check all the other route settings such as your WINS and DNS settings on that particular machine.

Paul M. Chavez

by curlergirl

The 255.255.255.255 netmask is not unusual with a RAS connection where the IP address is being assigned by a DHCP server at the dial-up server site. However, the problem you describe might be caused by your workstation not receiving the correct DNSand/or WINS entries from the dial-up server. I would suggest that you configure your dial-up settings so that the DNS and/or WINS entries are static, even if the DHCP server at the other end is supposed to be giving them to you. See if this solvesthe problem. Hope this helps!

This discussion is closed to new replies.