Discussion Locked

Internet Sharing

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a desktop running "ME" and connected to a cable modem. I also have it routed through a hub. I want to connect my laptop to the hub to have access to the "ME" computer, and be able to share the cable modem. The "ME" computer has no problem connecting to the modem. The laptop does. I need assistance on how to set this up so I have both using the the modem at the same time

11 replies

by ebob

Setup "Internet Connection Sharing (ICS)" on the "ME" box. For full details look in Start-->Help or on the MS website. Depending on what you're running on the laptop, you may need to install and ICS client.

My PERSONAL preference is to not use ICS, but to install one of those nifty hub-switch-firewall-router boxes (Asante, 3Com, USR, D-Link, LinkSYS, etc.). Then just plug all of your PCs into the box.

The advantage is that you would not need to have the ME box running just to access the Internet from the laptop.

by boxerscalizu

I have a LinkSYS Hub, and both PC's are plugged into it. The Desktop running "ME" is able to connect to the internet, but the laptop "2000" cannot.

by rob k.

You can download a gateway program such as rideway. I have used this in the past and have had as many as 4 PC sharing a dialup connection. When I changed over to a cable modem I was still able to use the program. It has step by step setup directionsthat are very easy to follow. If you have any questions on the program ( rideway ) E-mail me and will try to help.

You can get the program here. http://www.itserv.com/rideway/download.asp

Hope this helps
Rob K.

by boxerscalizu

Thanks for the info, but this should be able to be fixed within windows. Worst case I will use this download. Thanks for the help.

by teki

the URL did not copy correctly, there's no space in icsmeinstall.htm

by rmccon

Hi,

Hope this will help.
Just to be clear, you have two NIC's in the ME Computer. One to the internet, and the other to the hub. Now I don't use ME, but if it is like 98SE, then you must set-up the ICS, Internet Conection Sharing.

You can enable Internet Connection Sharing by using the Add/Remove Programs tool in Windows 98 Second Edition or Windows Me:
1. Click Start, point to Settings, click Control Panel, and then double-click Add/Remove Programs.

2. On the Windows Setup tab, double-click Internet Tools.

3.Click to select the Internet Connection Sharing check box, and then click OK.

4. Click OK, and then follow the instructions on the screen to run the Internet Connection Sharing wizard.

(except from MSKB Article Q234815)

Once this is done, you should be able to share the connection.

For more info goto:
http://support.microsoft.com/support/kb/articles/Q234/8/15.ASP?LN=EN-US&SD=gn&FR=0&qry=Internet%20Connection%20Sharing&rnk=17&src=DHCS_MSPSS_gn_SRCH&SPR=WINME
or search for Internet connecton shareing on the microsoft knowledge database.

Good luck and let me know if this helps.

This discussion is closed to new replies.