Discussion Locked

Invalid COMMAND.COM error

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a newly formatted hard drive which I am trying to install WIN98SE on. Booting form the disk to do the install I keep getting an error message saying INVALID COMMAND.COM then asking me for the location of the command.com. Any idea why or howto solve.

9 replies

by caper

Create another boot disk from a Win98SE machine (just to make sure you have a valid copy of command.com)and make sure your BIOS allows you to boot from diskette first. You may also need drivers on the disk that allow access to the cd-rom. Then FORMAT C: with s switch.

by jaolson40

Sounds like you have a bad boot floppy. Toss that one away, then create a new one from a different Win98 machine.

by jrjacques

you have a bad boot disk the easiest thing to do if you have an IDE CDROM is to change the boot sequence in the BIOS to boot from CDROM first as the WIN98 cd is bootable and have the cd drivers installed.

by zlitocook

Do you remove the floppy disk after 98 starts loading? The computer will refer back to the floppy several time at install. But the other answers are correct to your boot disk may be bad.

This discussion is closed to new replies.