When it was connected to a XP System did you look in Drive Management? If not it's possible that the Partition Information is corrupt and that will not show anywhere but Drive Management where you will be prompted to format the drive.
Well the bit that stuck out was
[i]The drive also get very hot but there is no clicking sound on it.[/i]
Which part was getting hot?
If it's the HDD itself and this unit has not been running long there is something drastically wrong going on.
If it is the Interface Card between the USB Lead and the HDD this is a sign of a Electrical Short Circuit.
This could be caused by either a simple Short Circuit in the Actual Electronics or it could be that the Plug Pack is malfunctioning and no longer supplying the 12 V DC and has gone high supplying more than the stated 12 V. It's also possible that the amount of current available from the Plug Pack is too low and this will overload the Interface Card causing heat to build up.
Of course if this isn't the Plug Pack that came with the Drive then it's always possible that it's the wrong voltage and causing the problem. ;)
Col