Discussion Locked

IP printing with Windows 98

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am wanting to setup a printer in Win98 that is ip based and not queue based. Is there a way to set up a ip port in Win98 like there is in Win2000?

5 replies

by earnest

Usually Ip printers get their connectivity from Jet Admin < hp > and Phaser Port < xerox>. Xerox also has an lpr program that lets you access a network connected printer. After the printer < lets say an hp since they are the mostest and easiest > has been addressed and connected to the network, the program is loaded on the win98/95 pc and the ip is set, and the specific driver for that pc is loaded. Thereafter whenever printers are added an "other" option is jet direct port. So you can do an "Add Port" and define the ip of a similar printer you want to access on the network.

Bo

by fierygod

There are several programs available for adding lp capability to Win9x Two I have used are:
ACITS: http://www.utexas.edu/academic/otl/software/lpr/

WLPR Spooler: http://ich210.ich.kfa-juelich.de/wlprspl/index.htm

Of the two, I like ACITS muchbetter,its easier to setup, requires nothing to maintain. I have not used the latest WLPR version, but the previous version had to run software on the PC all the time, was harder to set up, and crashed regularly needing operator intervention to get going again.

This discussion is closed to new replies.