Discussion Locked

IP release/renew

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hello,

Several users use windows 95 and are sometimes working from home using dial-in and sometimes they are connected directly to the LAN. The following problem exists: After they have dialed into the domain from home and arrive in the office the next they they can only connect to the LAN after they have released and renewed the IP address. Could this be related to a missing necessary patch because users with other Operating Systems don't have this problem.

Thanks

8 replies

by riverwind

I don't know what Server Platform you are using. If you are using NT, you can bind the ip by workstations with DHCP, enlong the ip address lives, and bind different range of local connections and remote connections. I hope I can help you.

by brian.biby

The origional Win95 had a common IP setting between network/dial up adapters. Download and install the Dial Up Networking Upgrade v1.3 which should solve this problem since each adapter and DUN connections can have sperate IP settings... Good Luck!

by bww5195

One of my coworkers found the following information when dealing with a similar problem. (It tells how to make a registry change so that the IP address is released upon shutdown. This does take for granted that your DHCP server will give them a new ip address upon startup):

"...Another solution involves editing the Windows 95 registry to tell the machine to release its lease whenever the system is shut down. This information came from a source outside Novell and has not been verified by Novell. The registry settings for this are: Key:HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\DHCP
Name: ReleaseLeaseOnShutdown

Type: DWORD

Data: 0x00000001 (1)

If this value is notpresent, or the data value is set to 0x00000000 (0), this functionality will not be enabled."

The FULL article can be found at http://support.novell.com/cgi-bin/search/searchtid.cgi?/10011979.htm

Hope that helps.

This discussion is closed to new replies.