Discussion Locked

IPF in unknown module at 0000:*

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Lately I've been running into IPFs in various programs in module unknown at various addresses that start with 0000:*. This error occurss on win95 and 98. I haven't had any luck at Microsoft's Knowledge Base. Isn't this at Windows driver issue? Any other ideas where to get info?

1 reply

by csmith

These failures are a bear to troubleshoot.
You are starting on the right track. Usually the problem arises from some subtle conflict between a device the computer addresses through an I/O address and the Windows driver. (I am assuming you have checked the inside of the computer for loose components, excessive dust, cpu fan stopped, etc.)
However in one instance of this problem the print spooler was corrupt.
Keep a notepad and copy down the addresses until you see the pattern. From a memory map you can figure out which driver is faulty/corrupt.
I have had to use this method when the problem persists even after reloading Windows.
Regards, Chris

This discussion is closed to new replies.