Discussion Locked

IRQ Madness Uunder Win 2000

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Windows 2000 has taken complete controll of my IRQ's, nothing I do will allow me to manually assign IRQ's.

WIndows 2000 has assigned multiple PCI cards to the same IRQ which shows up in the conflict/sharing folder under SysInfo.

When I look atthe cards individually they do not show any conflict however, I am doing video editing and my SCSI, Video and Capture card are all being used at the same time, because they all share the same IRQ, the performance of my machine has dropped signifantly.

I would appreciate a work-around.
Thank you
Nygel.

9 replies

by nygeldbrown

I have already tried using the bios to assign
IRQ. They are ignored by win 2000.
Yes I have also PNP O/S to no.

by nygeldbrown

I have already tried using the bios to assign
IRQ. They are ignored by win 2000.
Yes I have also set PNP O/S to no.

by bart.nieboer

Some motherboards have PCI slots which don't share an IRQ. For example ASUS-CUSL2 does not share IRQ's on slot 2,3 and 6.

And there is a Microsoft Article on IRQ in Windows 2000.

Article ID: Q252420

by dharmon

The only way I could get control over the IRQs (almost required for heavy gaming) is to disable/uninstall/delete the Advanced Configuration and Power Interface (ACPI). If you go into Device Manager under Computer you'll see what I mean...though forthe life of me I can't remember how I got rid of it. I'm thinking maybe through CMOS.

The (minor, but I like it) downside is that your computer won't turn itself off anymore, you'll have to hit the power button. :)

This discussion is closed to new replies.