9 replies
by ann777
From www.whatis.com
The IRQ (interrupt request) value is an assigned location where the computer can expect a particular device to interrupt it when the device sends the computer signals about its operation. For example, when a printer has finished printing, it sends an interrupt signal to the computer. The signal momentarily interrupts the computer so that it can decide what processing to do next. Since multiple signals to the computer on the same interrupt line might not be understood bythe computer, a unique value must be specified for each device and its path to the computer. Prior to Plug-and Play (PnP) devices, users often had to set IRQ (interrupt request) values manually (or be aware of them) when adding a new device to a computer.
If you add a device that does not support Pnp, the manufacturer will hopefully provide explicit directions on how to assign IRQ values for it. If you don't know what IRQ value to specify, you'll probably save time by calling the technical support phone number for the device manufacturer and asking.
by easyed
by dmiles
IRQ
Interrupt Request
In PC's,an IRQ is a signal from a piece of hardware (such as a keyboard or sound card) indicating that it needs the CPU to do something. The interrupt request signals run along the IRQ lines to an interrupt controller that assigns priorities to incoming IRQs and delivers them to CPU,the interrupt controller expects signals from one device per IRQ line,if you have more than one device sending IRQ signals along the same line you get an IRQ conflict that can freeze your machine.
by easyed
by easyed
by easyed
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending