2 replies
by dinkey Accepted solution
by oh smeg Accepted solution
If it starts normally the Power Supply is your culprit, a Voltage Rail can not supply enough Wattage during startup and is pulling the Voltage Low and the device is not running causing the BSOD.
The obvious things here are HDD's or Fans causing this but it always comes back to a poor quality PS to begin with.
Also have you looked at the BIOS Settings? Wanting to run a RAID always is a setting in the BIOS where it's been changed to RAID. It's probably better to reset the BIOS to Factory Defaults by unplugging the system and pulling the battery and while it's out checking it for the correct voltage then using a [b]Known Good[/b] Battery and setting the Date & Time.
Of course if the Date & Time is incorrect you'll always get a BSOD as you obviously can not load a file with a Date Stamp latter than the current Date & Time can you? :D
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending