Discussion Locked

Is it the motherboard?

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a freshly formatted disk, a fresh
installation of Windows 98, and a new
video card. I installed the video card with
the accompanying CD.

Everytime I start Windows it tells me the
video card was not installed correctly.

Also, if I make an entry into Quicken
Deluxe and back it up, the next time I
open Quicken Deluxe the new data is
(are) gone.

If these problems are related to the
motherboard, how do I test this?

Thanks - answers here have been great,
so I'm looking forward to more!

Mary

11 replies

by timp999

I don't think it's your mb causing the problem... I'd look at the following items:

Video card: Let the driver update wizard search for the best driver for the device. If it finds one, let it install it. If it says you already have the best one installed, check the manufacturer's weh site for the latest update, then remove the adapter from the system in the control panel, reboot, and let the system detect it again.

The Quicken thing... check to see if either of these conditions are true...
1. The backup files are going to a different folder than they should be.
2. The software is searching the wrong path for the above-mentioned files.

Good luck!

by mary

This answer kept me focused on
the software. There was trouble with
the driver for the video card, and it
was hard to remove in order to start
over, but eventually, I was able to do
it.

by dmiles

Knowing what OS you are operating would have been more helpful,so I am guessing that the video installation is missing DLL files associated with the video board,not considered a mother problem.
Open the Control Panel>double-click the System icon,select the Device Manager tab,locate the video adapter and highlight in the sub tree and click the remove button,reboot the computer and let windows detect the card and install with cd.
For the Quicken problem click on the file menu and select save asthen choose where to save changes,such as My Documents or on a floppy.Hope this helps

by mary

The first answer sent me in the
same direction. I mentioned there a
problem removing the video adapter
- choosing to remove it caused the
computer to freeze. I eventually
reinstalled it, then removed it, then
reinstalled it again.

by wyldchilde

What video card do you have in the system? Is it sharing resources with anything? If it's an AGP card, do you have anything in the first PCI slot? What processor do you have in the system and what chipset is on the motherboard? If you have a non-intel chipset (via, ali, sis, etc.), you probably need to look for motherboard updates (irq routing, AGP, etc).

by csmith

There have been a rash of problems lately with video cards not being compatible with the motherboard chipset or not compatible with the CPU. Since you did not specify the MB or the Video Card, you will have to check this on the websites of the manufacturers.
I would check this first before troubleshooting the computer.
If the MB worked OK with the old video card, there is almost no chance the motherboard is bad. (It would have to have been damaged in the change.)(You can put the old video card back in to check the MB.)

The video card problem is in no way related to the Quicken software problem. As the other answers have indicated, check in the settings of Quicken to find out where the data is saved.
Regards, Chris

by grantcom

I would boot into BIOS and set to Non-Plug and Play OS...then boot to safe mode and remove all instances of video adapter. Might as well check for any other ghosted devices while there...reboot and feed the disk to Win when it asks for it. Pay particular attention to any messages or dialogs in regard to it setting up the adapter....sometimes Windows will again ask for a location of a file but will incorrectly default to a wrong location...i.e. c:\windows\system etc. when it should in fact be D:\Driver manf\Driver\Win98 etc. this seems to screw a lot of people up...they will just hit ok and windows will not find the driver and they will then hit next and the driver will not be set up completely.

by mary

This answer gives me more tools
for my troubleshooting toolbox - but
by the time I read it, I had solved the
problem. Thanks, though.

This discussion is closed to new replies.