There is no easy way to test this but you can start off with Mem Tester and test the RAM if it all passes remove 1 module and retest.
Then remove the fitted Module and replace it with the first one you removed. Test again.
Then if that passes replace the other Module in the second Socket and runt he system again.
If it falls over again remove 1 RAM Module and see if the system works correctly.
If it works correctly with 1 Module Fitted but not 2 you have Mismatched RAM that is experiencing a Timing Issue and causing the problem.
You can also try the newest drivers which should be available here for this system
http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=DIM_PNT_P4_4500&os=WW1&osl=en&catid=&impid=
Download Memtest 86 from here for free but you'll have to scroll down the page a bit.
http://www.memtest.org/
Or go the whole Hog and get yourself a copy of the Ultimate Boot CD available free here
http://www.ultimatebootcd.com/download.html
Burn the CD from the ISO File that is located on this Web Page and boot your computer off the Ultimate Boot CD and run a full set of Diagnostics including at least one of the Memory Testers included with the Disc.
All of the above Downloads are free so if you get asked to buy something you have clicked on the wrong link. ;)
As for the Antec PS it should be quite so if it's new and noisy I would be contacting either the place that you bought it from or Antec Directly for a Warranty Claim.
As for testing your HDD there are HDD Makers Testing Utilities on the Ultimate Boot CD so you can use Seatools to test your HDD. If it fails that test remove it from this computer fit it as a Slave to another with a different Data Lead and retest. If it still fails the test it's on it's way to [b]Silicon Heaven[/b] but if it passes the second test either the M'Board, Data Lead or Power Supply is faulty.
You can test these by fitting them one at a time to the second computer and retesting. Well all except the M'Board as if both the PS and Data Lead show as OK then it has to be the M'Board that is faulty. ;)
Col