Question Locked

Is there any way i can use my desktop external Hard Drive on my laptop?

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just bought an Iomega UltraMax with Firewire Hard Drive on eBay, not knowing it was a desktop hard drive. and i only have a laptop. i have an ACER Aspire laptop with Windows 7 on it. So is there anyway i can use the desktop hard drive for my laptop? maybe using special connections? or something. cause i really don't want to have to buy a whole new external hard drive.

18 replies

by seanferd

You mean, as advertised, "Desktop Hard Drive"? That just means it isn't made to be portable, is all. Not in the sense of "Desktop PC" as opposed to "Laptop".

by mollyannrawr

So that leads to another question. Once i Hook my hardrive up to my laptop can once everything is synced over can i unplug it and take it with me? or is that only for portable external hard drives?

by oh smeg

You have bought a Firewire only External Drive and do not have a Firewire connection on your NB is that correct?

Depending on which version of an Aspire you have you may be able to buy a Firewire PCMCIA or similar Card to use a Firewire External HDD. You would have to look at the specification of your Aspire and see if it has a Cardbus or PCMCIA socket, if it doesn't then no there is no adapter for a Firewire to USB.

However depending on the drive inside the enclosure you may be able to remove it from that enclosure and plug it into a suitable USB Enclosure.

As this was specifically made for Apple Mac's you'll need to format the HDD to be usable with a Windows OS and just use the USB or ESATA Connection on the external drive. Remember to use the supplied Power Pack as these drives work with 12 V DC not the 5 V DC supplied from the USB Port. ;)

Col

by justinrichardson

I believe that drive has a USB connection also. In fact, it is very rare to have an external drive that doesn't have USB, even if it has Firewire. Plug it into your laptop the same way you would connect it to your desktop, using a USB cable. An external drive is an external drive, regardless of physical size.

by mollyannrawr

Ok WOW!. i didnt understand any of what u just said. i have the Iomega

Iomega UltraMax Desktop Hard Drive, eSATA / FireWire 800 / FireWire 400 / USB 2.0

so idk what that means. but ya its supposed to work even if u dont have firewire

by mollyannrawr

hey i got it to work the only cords i really needed to plug in were the USB and the power adapter. there is 2 extra cords for Firewire and IEEE 1394 cable. both for Firewire. but i just used the USB cable for now. until i get Firewire on my laptop.

by justinrichardson

I believe that drive has a USB connection also. In fact, it is very rare to have an external drive that doesn't have USB, even if it has Firewire. Plug it into your laptop the same way you would connect it to your desktop, using a USB cable. An external drive is an external drive, regardless of physical size.

by oh smeg

A Firewire. ESATA and USB Sockets on it which can be used.

However as this drive was made for Apple Computers it comes formatted as a Apple HDD not a PC HDD. What you need to do is open Drive Management in your OS and format the drive after you connect with either USB or ESATA cables. Whichever you have available and remember to use the Power Pack. ;)

Col

by mollyannrawr

My disk format is FAT32 is that right?

It says the Partition is Healthy. And its Unallocated, whatever that means. really i just need to know if i need to format it. OR change the format type to something else like NTFS? OR exFAT?

and if i do need to format it. i need to know how to do that and what allocation size to use and if i should just use the default settings or not

by who am i really

re: File system & connections

if it's pre-formatted to FAT32
you can safely leave it that way
unless you plan on storing files larger than 4GB
in which case you'd need to use exFAT or NTFS

FAT32 has no security restrictions or implimentations
in which case if yer laptop takes a crap
you'll have no problems accessing the files on the external disk with another machine
(I use FAT32 on all external disks)

if your laptop has an express card slot
skip Firewire and go with e-SATA

USB-2 = 480 Mbps

Firewire
1394a = 400Mbps
1394b = 800Mbps

e-SATA
Gen 1 = 1.5 Gbps / 1,500Mbps
Gen 2 = 3.0 Gbps / 3,000Mbps
Gen 3 = 6.0 Gbps / 6,000Mbps

Express Cards normally run e-SATA at the Gen 2 speed

PCMCIA Cards can only run e-SATA at the Gen 1 speed

by mollyannrawr

Ok well now that ive backedup all my files. can i delete them off my computer? or do i have to leave them on their?

cuz i bought the external hard drive so i can clear my bigger files off my computer and just use them through my external hardrive. when its hooked up to my computer. so i have the files when i need them.

EX: iTunes is a really big file and i kinda wanted to put that on my external hard drive so that i can take it off my computer along with all my music and just use it on my harddrive when i need to sync my iPod and whatnot.

is that even possible? or not?

by alpha_dog

Install it in the laptop? no.

Connect it to the laptop, yes. Purchase an inexpensive IDE / SATA to USB converter. Make sure it comes with the power supply and all the little adapter cables. Should be about $15.00

Alternatively, you can buy an empty external case for around $20-40.00 and install your drive.

by who am i really

I wouldn't move it

you can move just about every other user file type
- MSO: Word / Excel etc. documents
- Image files (camera pics)
- etc.

but moving an iTunes library to another location is a complicated process
that can result in the loss of the library or part of it

you should still backup the library

by oh smeg

You may find that it's better to use NTFS instead of FAT 32. You???ll just get less wasted space on the drive as FAT32 isn't as good for the larger HDD's.

As for moving your Data tot he External Drive yes it's possible but it may not be desirable.

As for programs provided that they are installed to the External Drive they will work but if you just move them to the external drive then no they will not work. You need to install them to the drive and then again depending what programs are actually involved you are likely to get error messages about broken Links if you do not start the computer with the drive attached.

Also you need to remember to use the Safely Remove Option on the Start Bar to dismount the external Drive. You [b]Can Not[/b] just turn off the computer as the external drive will not be shut down correctly and this will lead to a corruption of the Partition Tables and possible loss of your data.

Another thing to remember is that External HDD are not designed for full time use and are subject to Heat and Vibrational Damage more often than Internal Drives are so you should work on the premiss that the drive is going to fail sooner rather than latter.

If you need a external drive to use a lot of the time you need one with an Actively Cooled Enclosure like the one made by Antec the MX1

http://www.antec.com/Believe_it/product.php?id=NDc=

As for Vibrational Damage there is unfortantly nothing you can do to prevent this from occurring.

Col

by seanferd

Yes, certainly. You just need to be more careful with it than a drive which is designated as "portable". Be gentle, don't swing it around in a bag, or toss it on a car seat, or drop it.

Portable drives are just more shock-proof, essentially, and have a different sort of look and design to the case.

This discussion is closed to new replies.