Discussion Locked

Issues regarding LPT2 and IRQ errors

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

IRQ is reporting 17 to 20
LPT2 card was not accepted, which was previously working until win2000pro decided to juggle the IRQ's about.

5 replies

by mckaytech

I have had some problems with legacy hardware under Windows2000 and usually what I end up doing is explictly configuring the LPT2 card for IRQ5 and then going into the BIOS and removing that IRQ from the PnP pool.

paul

by dsmith8369

Hello Geoff,

I don't want to say I told you so, NT would have been a better option but I think your new found technique of resolving the problem is a unique solution "Just discovered the latest Win 2K boot up procedure:

Win2K new boot up technique -
Aim right foot at lower part of system casing at approximately 33 degrees from the horizontal, at a velocity of not less than 2mtr per second, per second (acceleration), with a final contact force of not less than 250 newtons!!!! In other words, a bloody good kick up the butt!!!!
Works a treat, I can assure you!
GB
ps. a newton is approximately equivalent of a medium size granny smith. This is how it got the name Newton. Ask Will Tell how to remove the proverbial apple off the head!!!"

This discussion is closed to new replies.