Desktop

Ask something
Discussion Locked

JetAdmin and setting up printer on Novel

0 helpful
1 reply

by m. lacombe

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is a really stupid question. I know I've set it up before but I'm afraid I need a little help.
I've created the Queue and Server in JetAdmin. I found the hardware address of the printer I want to setup in Novell. But I can't seem to find where I can connect the Print Server to the Printer. It's been a while since I've set the last printer up like this and we're trying to get away from Novell onto NT. Is there anyone that could point me in the right direction?

1 reply

by jboehlke

Did you say that you are using NW 3.12 or 4x/5x? If you are using 3.x then you will probably need to run pconsole.exe from sys:\public.

If you are using NDS, then JetAdmin (if it's newer) would create the objects in NDS for you and configure the printer. If this is what you are trying to do, and you are on a 3x system, you won't find it.

You will need to run pconsole and set it up from there.

Jeff

This discussion is closed to new replies.