Discussion Locked

Join the Microsoft Office Suite discussion

0 helpful
125 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is page 2 of the discussion. Read the opening post

125 replies

by qaman10

Your user has at some time opened a document with an East Asian language active. When it happened to me, I found Korean to be one of the options. Go to Programs-Microsoft Office Tools-Microsoft Office Language settings and remove any language from Asia - that is unless your user really needs them. Your marks should then go away

by long sam

Thanks, TxMischief, for pointing out the printer drivers. In our shop it also appears to be a printer driver issue. Glad to hear HP is stepping up.

This occurs to us most often in documents which move between portrait and landscape modes. Headers and footers are not handled correctly. Check to be sure there is a section break for every switch, and be sure, in headers/footers, to turn off the "same as previous setting."

However, we've noticed sometimes it is purely the printer driver -- the problem disappears if the document is queued to another type of printer.

by lschrim

As a shortcut, you don't have to type in Sheet 1 and cell A1. In the cell you want that nifty answer to show up in, just type = then move to Sheet 1 and click in cell A1. Hit Enter and you're done!

Linda

by xxdrummerxx85

I found that changing the compatibility in the options menu of the tools tab worked the best. If you are opening the document from an email or any other data base you will run across a lot of these problems. Thanks for the help "tryitagain"

by david.hanshumaker

Assuming you want to sort the entire list of records you've imported, wouldn't the 'Select current region' function be the easiest way to do your sort? You wouldn't have to specify how many records in the macro that way.

by ligurza

Hi. I have a user that has a Powerpoint presentation. She is using a logo on it. When opened the presentation slide with the logo on it, as a black boxes, about a quarter the size of the slide. When she opens a MS Word doc, the same thing happens with a logo at the top, used as a letterhead. Only the logo is affected. She is using HP Compaq Nx9010 laptop with onboard ATI graphics card. Any suggestions? I have reinstalled office & the graphics driver.

by lgoodman

Have you checked the properties of the logo? Did she copy and paste it into her presentation and word document? Where did she get it from? Some graphics are protected for copy and paste, showing up as just a black box. She may be able to play with it in a photo / graphic editing software (photoshop, etc.. Otherwise, she probably just needs to get a different version of the logo.

by administrator

I know that, in some instances, you have to give the entire DFSroot path. Like this;
\\domain name\dfsroot\share name.

the words "dfsroot" are fixed, not a variable.

by jlblack

Kevin - -If what you want to do is to enable someone already in Access to search the contents of the database, that is pretty easy to do. You would just use the toolbox to add a button which provides the same "find" functionality that is in the top toolbar.

If you want to be able to search Access database contents from another application that is something quite different. I am hoping that the new desktop search engine from MSN will be able to do that, but I can't anything that says it does. If you find a solution to that, please let me know.

I believe the old AltaVista desktop search engine did that, but I may be mistaken.

by atcollege

This seems to be more of a problem in Word 2002 and Word 2003. Our users here had no problems until they were upgraded to Win XP and Office 2002.
The fix is in Word. Tools menu, Options, General tab.
Check Confirm conversion on open. You will only have to do this once, as it sets the Word default.
Then when you use an Excel SS as a data source, you will receive a list of ways to connect to the data source. Choose the DDE option.
The rest of the prompts are the same as in the past.
Dates and number formats come across as they should.

by willfromsf

When I select File Open on virtually any Microsoft application (Office apps, Wordpad, Notepad, etc.) and click the down-arrow on "Look in:" (at the top of the Open window) the app freezes and I have to terminate it. Yet this problem does not happen with non-MS apps. Anyone know of a relatively easy fix? Thanks.

by wayne

I've got two users experiencing the exact problem you outlined. Did you find a solution?

by wayne

Will,
It appears that my problem was caused by a mapped drive that the user/s didn't have access permissions to. When I entered the mapped drive through Explorer I was prompted for a username/password so I disconnected from the drive in Explorer then tried File/open/look in (dropdown); Problem solved. I changed the permissions on the drive previously mapped, then remapped and all is well.

by aj1000

I just upgraded from Word 2000 to Word 2003. I haven't changed printers or made any other changes, but when I open up a very long document that I created in 2000, there's a problem in 2003 that didn't exist before.

The margins seem to have shrunk and when I print the document all pages print out smaller than they should leaving large gaps of white space along the bottom and right hand margins. I can't change the margins manually without distorting the content of every page. I don't know how to fix this to make it print out as it did before with normal margins and normal sized font.

I'm not sure if this could be a source of problems, but this document has a "table of contents" that was created in Word 2000.

I'd appreciate any help.

by christiegooch

I think the link problem is related to one of the IE hotfixes pushed down in the third quarter of 2004. I am an avid Tech newsletter reader and all of a sudden one morning, I could no longer access the discussions nor anything else on the TechRepublic site. After a couple of weeks of frustration and deprivation, I installed Mozilla FireFox and everything works fine. This morning I ran into the situation where I clicked the link for a second time and got directly to the site through my IE browser. (That second attempt had not worked prior to this.)

by atcollege

At our college we have the same problems. They started when we upgraded users to Windows XP. It seems that the HP drivers didn't work exactly right with the new operating system. The giveaway is that when you let Word "fix" the margins, either the bottom or left margin is changed to 2.67. All our printers were capable of much smaller margins which they happily accomodated before WinXP.

By trial and error, we came up with several solutions, none of which are a permanent fix.

In the offending document, select a printer that doesn't give you these problems. Make all your editing changes. Save the document and then close it. Reopen the document, immediately print, (don't do anything else), using the printer that chops off margins. It's a pain, but it works.

The real fix is to get corrected HP drivers if they are available.

by michael.umehara

I had a similar problem which turned out to be the result of a comment box way at the bottom of the document.

Word 2003 conveniently adjusts the margins to show comments and tracked changes.

In the print dialog box where it says "print what" select "document" or in the "display for review" toolbar section, select "Final"

by aj1000

Thanks for the tip. That's a good solution for printing. I also just discovered that on the view menu, if I turn off "markup" (which turns on in 2003 by default), then the page on screen appears normal and also prints with regular margins without the comments. These sidebar comments don't appear in Word 2000 so it took me by surprise when the margins seemed to be distorted. Now that I understand this feature, I like Word 2003 more than Word 2000.

by mpd

Does anyone know of a way to remove a given Font setting - e.g. Arial from a Heading Style so that it will be based on the Normal style font setting?

by gwk

Some documents produced in earlier versions of Word come up in Word2003 with "Track Changes" set. This means that Word2003 leaves a RH margin (by default) on screen and in the printout to show the recent changes to the document. Probably worth hitting the "Accept all changes" command (usually from a menu icon) and see if this solves it.

by gwk

Since posting the original problem, I have upgraded my ancient PalmII (using Intellisync software to sync Contacts, Tasks and Notes but not email) to a MS Mobile2003-based PDA. The problems have gone away - I can only assume they originated from the dated setup I was using. Not really acceptable, but perhaps inevitable.

by marianhorsley

This is probably too late to help the writer of this problem may help others.W

When I upgraded to 2003 I experienced the same problem. It happened to me on a class outline that I repeatedly have to hand out.

When I went to Print, there is a section in that window titled Scale. I opted for Scale to paper size and chose 8 1/2 X 11. That seemed to solve the problem. I still have to repeat it when printing the same outline sheets.

by dlfitz

Does anyone know how to disable the Alt+Click shortcut for getting the Research Task Pane in MS Word? I use Alt+Click extensively to highlight blocks of text. About half the time it works and about half the time it brings up the Research Task Pane. (I know the three key shortcut for block text, but it is too awkward to be practical.)

by nickrusso

Access use Expr1: as a default to precede an expression in a query. You can replace it with your own text (leave the colon) to act as a "field name."

To see your expression, widen the column in the design grid, or press Shift+F2 while in the expression to zoom.

This discussion is closed to new replies.