Discussion Locked

Kodak DC3400 compat with Win Profess

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

Trying to get my Kodak Dc3400 Mounter and "Twain" software to install properly on a Dell Lattitude laptop PentiumII processor. It has Windows Professional installed recently and the laptop reboots when shutting down or going to suspend and the mounter and "twain" software install does not complete as well. Are Kodak and Microsoft compatible on the Windows Professional O/S?

Tony E.

4 replies

by saihib

The following came right off of Kodak's website. So, according to them, the software will work with Win2K.

WINDOWS SYSTEMS
WINDOWS 95/98, WINDOWS NT4.0/2000
(USB requires WINDOWS 98/2000)
Personal computer with minimum systems
requirements torun the operating system
(PENTIUM 90MHz or greater microprocessor)
16MB RAM minimum or greater
120MB of available hard disk space or greater
CD-ROM drive for software installation
USB port, serial port, or
COMPACTFLASH Card Reader
Color monitor with 256 colors
(16 or 24-bit color recommended)

by tezerskis

FYI.. The problem was due to an outdated driver for the Samsung CDROM drive.
Thanks for the input.Tezerskis

This discussion is closed to new replies.