Discussion Locked

Laptop Home and Office Network Connect

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am have searched about and am unable to find an answer to this question:

How to set-up different network connections for home and office environments using Windows 2000 Pro on a laptop?

Example:

The office network has a W2K Server and a domain name of 'companydom.com'; the user has a laptop with Win2000 Pro and connects to this network using DHCP with a wired Ethernet Card.

At home, the user has a small home peer to peer network using Win Pro 2000 and Win 98 computers with a cable modem connection to the internet. The laptop has a wireless card and connects to the home network with it. The home peer to peer network has no domain, but has a workgroup name 'homegroup'.

How would one go about setting up the laptop so that it could easily switch between the two network envoronments?

I could not find much in Win 2000 help or technet, except the respective NIC crads would need to be enable and disabled depending on the environment. Easy eneough, but what about Network Identification? And logons? And anyother considerations?

Any assistance would be appreciated.

9 replies

by john_craycroft

This is almost exactly my problem as well. In my case, 2 Win 2000 Professional laptops connect to a Win 2000 network at work. I need to connect them at home for file sharing purposes. However, w/out connection to the Win 2000 Servers, it seems I must change the laptops to workgroup membership. How can I switch them from peer-to-peer at home, to client-server at work, with minimal reconfiguration?

by peggyellis

Hardware profiles are useful if you have a portable computer. Most portable computers are used in different locations, and hardware profiles will let you change which devices your computer uses when you move it from location to location. For example, you may have one profile named Work, set up for use with network (LAN) with hardware components such as a CD-ROM drive and a network adapter. And you may have a second profile named Home for using your portable computer in a hotel or on an airplane, when you are not using a network adapter but you are using a modem and a portable printer.

You can manage hardware profiles by double-clicking System in Control Panel, Hardware tab, Hardware Profiles. If there is more than one hardware profile, you can designate a default profile that will be used every time you start your computer. You can also have Windows 2000 ask you which profile to use every time you start your computer. Once you create a hardware profile, you can use Device Manager to disable and enable devices that are in the profile. When you disable a device in a hardware profile, the device drivers for the device are not loaded when you start your computer. Good Luck

by 4u21der

Symantec makes or used to make a product called Mobile Essentials 2.5

If this prodcut is not available my next choice would be to create seperate hardware profiles that had the correct setting for each network.

Call one Profile ( Work ) and One ( Home )

Make the settings for each and inform the user on how to switch between each one. I have used the method with great success.

Hope this helps.

Good Luck!

This discussion is closed to new replies.