9 replies
by phatboy6 Accepted solution
by otaku_lord Accepted solution
wiping the disk with a third party package like Partition Magic?
Also, make sure that the drive can read the disk while you are booted into the OS. It could be dirty optics or something similar.
Check those and then we can try some other things...
by phatboy6 Accepted solution
by kenone Accepted solution
What happens when you try to boot from the CD?
Do you get an error message?
What does it say?
by oldbaritone Accepted solution
A PC from that vintage should be able to boot from the CD, and should recognize a bootable CD.
Try removing the HDD from the bootable device list, and leave the CD as the only boot device.
Does it have anything like "F12 for boot menu?" just asking.
Will the authentic CD boot on a different system? (Check that there is no damage to the boot tracks of the CD)
Can you plug in an external CD drive and boot from that? Sometimes there are compatibility issues, and it sounds like you may have some.
The key to the HDD changes is getting the PC to boot from the setup CD. Then you can wipe/format the HDD for the reinstall.
by phatboy6 Accepted solution
by mafergus Accepted solution
by phatboy6 Accepted solution
by oh smeg Accepted solution
Boot & Nuke to wipe the drive and then try installing the OS?
Also how did you test the Optical Drive to make sure that it actually is working?
If you tried it with a DVD and it worked that only shows that the DVD works as there are 2 different wavelength/color LED's to generate the Laser beams it is possible that one works and the other doesn't. It's a common thing to have a DVD Drive read one type of media and not the other.
Also when you go into the BIOS and make any changes to boot from the Optical Drive do you save the changes as you exit the BIOS?
If not then you are not setting the system to boot from the Optical Drive.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending