Discussion Locked

Lexmark Optra takes long time to print

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a Lexmark Optra 1200 that takes quite a long time to spool and print from Corel draw and Adobe Pagemaker 6.5. Anybody have any suggestions, The tech help from Lexmark was no help whats so ever. I've swapped out cables and reinstalled drivers, I don't know what to do next.

7 replies

by dcassat

You don't say whether you are printing over a network, so I'll assume you are. Check the printer properties and make sure that the print direct to printer is selected so that the programs don't first spool to the workstation's hard drive and then to the network printer. If this isn't what you're looking for please supply information on the workstation OS and network setup in rough detail.

by dandiaz17

Using NT 4.0, I've tried playing printing directly to printer. The printer is local. It seems to me that the only problem we're having is with Corel Draw and Adobe Page Maker 6.5.

by edvandyk

Are you printing from the PC the printer is connected to? If that is the case you may want to re-install the print drivers. If another PC is trying to print to the shared printer it will be slow due the resources available on the PC the printer isconnected to. Can you add more RAM to the printer? You could add more RAM to the local PC? If the local PC is printing it will have priority. You may want to use a JetDirect print device so you can connect the printer to the network. Hope this helps.

by estebandelatorre

Re-install the latest print drivers for a good start. If another PC is trying to print to the shared printer it will be slow due the resources available on the PC the printer is connected to.
Can you add more RAM to the local PC? If the local PC is printing it will have priority.
Check under pthe printer tab, resolution!! and the print method, spool or print as soon as it can
Hope this helps.

This discussion is closed to new replies.