4 replies
by hal 9000
If you are directly connected to the modem unplug the modem and allow it to reset itself for about 30 seconds and then plug it back in.
If you are connecting to the Net through a Hub/Switch unplug that and do the same thing that should cure your problem.
Col
by alvinlj
by sgt_shultz
when you are at the place with no internet access, go to a command prompt and use ipconfig to help see what the problem is:
Start/run cmd
ipconfig /all
(you don't have to do the step with the /all switch but you might find it interesting)
note what ip address is appearing on the lan card
then fix it thusly:
ipconfig /release
ipconfig /renew
do another ipconfig /all and see if stuff changed.
if no joy see if you can ping the gateway (your cable modem)
by ptreadway
I had the same problem and used this download to fix it. Go to www.snapfiles.com/winsockxpfix.html
Hope this helps.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending