Discussion Locked

limits of CD R/W

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
does any cd writer has limit of production on CDs...... and then it become useless..... like a pen writs on a paper then ... pen is out of ink

7 replies

by eddie c

CD-Writer is just like a television which will not last forever. It does not use ink. It uses laser technology to record data on a CD. AT some point, the CD-Writer needs to be replaced just like a television.

So, how long do it last?

A Sony television will last longer than a CHEAP CHEAP television. Voila!

Good Luck.

by jmstitt

I agree with mostafa90@usa.net. What he has stated is correct. There is however a possibility for getting more life out of your burner. The burner itself is a field replaceable unit, your not supposed to repair it, just replace it. If the drive still powers up and is recognized by the computer as a valid IDE device and the drive door is still functional. You can try carefully disassembling the burner. Use alcohol to gently clean the laser's lens. Clean all dust or dirt particles from thelaser slide and cd stabilizer (both the bottom and top). Then vaccuum any dust or dirt from any of the other areas. I have recovered a few drives doing this. Make sure you unplug the device to avoid any shock hazards. If the drive isn't working now, you certaintly can't hurt it any more. HTH

by mckaytech

In the sense of running out of substrate like a pen running out of ink - no, there is no limit. Nor is there a limit to the laser's life like there is for an incandescent bulb.

The failure modes are either failure of the solid-state laser which is a random occurrence or wear on the mechanical components that result in burning tracks that are out of tolerance. I'm guessing it would be rare to see either failure in the first couple thousand disks recorded.

paul

This discussion is closed to new replies.