Discussion Locked

Load Error!

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an NT Host that as been deployed as a developmental server for some time. It runs NT 4 SP6. It has been used by our Web Developement Group as a load leveling tester for other production boxes.

All of sudden, during the boot process, befor e getting to the NT loader the system generates an error "Load Error!"

The bios log shows a change in memory size, however it reads all 256MB during post. I have taken the memory out tried other sticks, but the error remains. Has anyone run into a similair situation.

The box is a Gateway PIII/733, 256Mb of memory.

Any suggestions would help.

Thanks - GSM

3 replies

by wiznogood

Hi,
have you reset BIOS setup to default values? It usualy helps, although machine may not be tuned at best performance.
It doesn't harm to detect your IDE disks again.

by garos

Although the BIOS reset did not help, the suggestion for re-detecting the drive pointed at the problem. The HD was bad. I have repleced it and the box is up and running. Thanks.

This discussion is closed to new replies.