Discussion Locked

Local printer setup prints to network pr

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
A user's WINNT Workstation has an obscure problem. She called and said her parallel port was not working. The easiest test I know of is to connect a printer locally. I did so using a HP Laserjet 5L with WINNT drivers. After setting it up I printeda test page but the test page went to her default network printer stating that it was a test page for a HP 5L. Huh? So I deleted all the printers, rebooted and resetup the 5L. The test page still went to the network printer. I'm sure it has something to do with the parallel port and network addresses, but what? Thanks.

7 replies

by t.brueckner

Hello,
I think you have captured lpt1 to a network queue. Check it in dos mode (cmd)under NT: enter net use and look for lpt1. You can show the syntax with net use /?

by mjchekal

Bruce,
I would look at that (a Net Use Redirect) or if you are in a mixed Novell/NT enviroment I would look at the user loggin script or group memebership to see if there is a Novell redirect. Also check and see if there may be another app. forcing this like a third party que app. or driver for one of those OA copiers that scan fax copy and print

Mike

by kevin_b

The last thing to do is to go through the registry and delete all references to the old printers before you try to add one again. I have had to do that a few times to fix issues where delteing the printer and readding it didn't fix the problem.

This discussion is closed to new replies.