Discussion Locked

logging on to domain controller

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Have a home network . Currently only two computers hooked up. Recently, I replaced the pdc server with a different computer. I gave the new computer the same name, same domain. Now, the workstation will not log on to the pdc. I can still share filesbetween the work station and the server but always get the same error on log on, "Unable to locate domain controller, logging on with cached profile." How can I correct this? Thanks, Michael

5 replies

by ryan4x4

If you replace a PDC with another computer it does not matter if you give the new server the same name as the old one, your ACL has changed and the only way that you can fix this problem is to add your workstation to the new PDC an configure it to join the new domain. When you replace a PDC, if you do not have a BDC, it is like setting up a whole new domain together. If you would of had a BDC you could have promoted the BDC to a PDC in server manager and took the old one down. Hope this willhelp, Ryan.

by ckwhittle

If you replaced the PDC without creating a recovery disk, and then installing the new PDC with the repair option, you have just created a new domain with the same name as the old one. You will need to have the workstation disasociate from the old domain, then join the new domain.

This discussion is closed to new replies.