15 replies
The Win98 don?t support this feature, choose ?where? you will log on. If you choose login in a DOMAIN, you will only be autenticated by the Domain Controler.
By other side you can change it in Network in control panel, or right-click the Network Neigborhood.
by adildy
The Win98 don?t support this feature, choose ?where? you will log on. If you choose login in a DOMAIN, you will only be autenticated by the Domain Controler.
By other side you can change it in Network in control panel, or right-click the Network Neigborhood.
by adildy
The Win98 don?t support this feature, choose ?where? you will log on. If you choose login in a DOMAIN, you will only be autenticated by the Domain Controler.
By other side you can change it in Network in control panel, or right-click the Network Neigborhood.
by adildy
by ds9
In windows 98, when the log on box appears, you merely click on CANCEL, and it will by-pass the logging into the network, and should go directly to your desk top. However, if you do have it connected via a NIC card to a network, then after you do bypass the first log on screen, you may still get a second log on screen to log into WINDOWS 98 itself, since it was already set up to check security in the first place.
I'm not aware of an automatic log on capability for Win 98, with out going intothe registry.
Regards
by adildy
TweekUI provides automated logon for the Win9x family of Operating Systems and Windows 2000, client editions. ***However, it is in "clear violation of corprate and/or enterprise network security and policy" to install such a program without first gaining consent from your I.S. and/or I.T. department(s).***
TweakUI and TweakUI 2000 are part of the Microsoft "Power Toys" collection found at Microsoft's Website. TweakUI also comes with the Windows 98 Plus Package.
by adildy
by bww5195
Before you try the following, it is an extremely good idea to have a backup of your Windows registry files, user.da* and system.da*
Start the pc in safe mode, go Start, Run, Regedit.
Go to HKEY LOCAL MACHINE, SOFTWARE, MICROSOFT, WINDOWS, CURRENT VERSION, NETWORK, REAL MODE NET. In the clear area of the right window pane right click and choose New, Binary Value. Name it AUTOLOGON. Next, right click on the AUTOLOGON key and choose modify. At the window that pops up, type a 0 (zero), two zero's appear. Click OK, close regedit, reboot.
Next time you boot up, the pc should bypass all network logon requests, except if you have network mapped drives that are permanatly mapped via Microsoft Networking.
by adildy
by shmaltz
The above answers might help when what you want to do is logon automaticly when you are connected to the network or you dont know the password.
But as I understand your question, you want to be able to gain access to windows when for some reason you cant gain access to the Domain Controller (b/c the DC is down or you NIC does not work), to do that:
if you are allready loged on to windows then:
1. goto start run then type in regedit
2. click onto the HKEY_LOCAL_MACHINE>NETWORK>LOGON
3. lookfor the MustBeValidated DWord value and double click and enter 0 instead of 1.
If you are NOT loged on to windows and you cant logon b/c the password can not be validated:
restart your computer and boot in into safe mode and follow from step 1 above.
By the way your administrator is going to kill me for telling you that :)
by adildy
by adildy
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending