Discussion Locked

Losing Connectivity

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Here's the deal. I have 1 static ip address from my service provider. Commercial ADSL. The Win2000 Server is on that ip address on the public nic. (216.21.159.4). I have DHCP, Wins, IIS 5.0, Exchange, and Terminal server working on the Server. I have a win2000 box behind the server using NAT to access the internet. It seems highly unstable. I'll be surfing on the win2000 box fine, or the server, and out of nowhere the access will stop. I can ping 216.21.159.1 - 216.21.159.254, any computer in that block responds. Anything else I cannot reach. If I disable then reenable the NIC it's fine again, but then I lose all my services. Also anyone outside can ping me even when I can't get out. But again they cannot access services on the server ( IIS, Exchange, Terminal. only ping and netbios-snn port respond. Any idea's

3 replies

by curlergirl

Does the win2k box that is running NAT have two NICs? Or are you using one NIC with 2 IP addresses? Where is this box getting it's external IP address - from the win2K server? I'd look at the routing table on the win2k NAT box - particularly checkthe default gateway settings and DNS settings. Is there any proxy or firewall anywhere other than your NAT box? Is there anything behind the NAT box trying to get to the Internet and does this work at all? When your access "stops" can you browse by IP address but not by name? Or is it blocked completely? Which NIC are you disabling and re-enabling? This sounds like a lot of questions and no answers - and it is. But this is a pretty complex issue with lots of variables.

by charles

The box has 2 nics ( one internal, one external ). The external address was given me by my ISP. It is static. The win2000 professional box uses the server to access the internet through NAT on the server. It works when the server works.... The nic Idisable then re-enable is the NIC on the server with the static public IP address. Then I restart all my services and it's back to good for a while

This discussion is closed to new replies.