Question Locked

Loss of wave file volume setting

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My client has a Windows XP desktop with a
Realtek on board audio chip. Recently, he
has been getting no sound when loading the
OS or when closing it. I checked the audio
settings and the volume for wave files. It
was at 0. I reset the slider to maximum and
tested sounds. All were fine. I rebooted
the PC. Windows startup audio played. When
I shut down the PC the Windows closing audio
played. The next time I powered up, the
Windows startup audio did not play. I then
checked the settings and the wave volume
slider was again at 0. Tried resetting
several times. The same sequence occured.
All other settings remained where they were
set. Have never seen this before. Any
ideas?

17 replies

by oh smeg

Audio Driver it sounds as if it's been corrupted.

Col

by rovoco

I updated the Realtek High Definition Audio driver, restarted the PC. Wave files did not
play. Found the Wave volume slider at zero again. Sorry, doesn't seem to be the driver.
Thanks for your response.

by cmatthews

..normally explorer writes these sndvol32 settings back to disk on a "normal" explorer shutdown. It appears that when these writes are happening, they get trashed cause the machine is going down anyway.

Check permissions on this branch of the registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\(vendor-code-for-his-sound-card)

by rovoco

I waded through the PCI folder entries, but
could not identify a Realtek HD Audio vendor
code. This is an on board chip on an Asus
M2N-MX SE Motherboard with an nVidia chipset.
What am I looking for here?

by cmatthews

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceClasses

..and do a ctrl-f (find) on the text "Wave" and repeat (F3) text search downward until you see groups of sub-keys like:
#synth, #midi, #wave and #uart

I'm sitting at a PC with 3 branches above with these key settings:
{65e8773d-8f56-11d0-a3b9-00a0c9223196}
{65e8773e-8f56-11d0-a3b9-00a0c9223196}
{6994AD04-93EF-11D0-A3CC-00A0C9223196}

So right-click these branch permissions to give the user in question (better, all users) Full Control.

by cmatthews

..I always keep it on a flash drive ready to go:
http://www.gtopala.com/siw-download.html

When checking clients machines, the last thing to do is open Pandora's box. This lets a tech see and log details to one html file on the USB drive. Later when they call, the tech already has a birds-eye-view and knows when clients are making undisclosed changes.

As yet, I've not found anything to compare ;-)

by rovoco

Installing the latest Realtek drive for the client's Asus MOBD from DriverDetective worked, but did not solve the problem, so I am following the suggestions from cmathews (see thread entries). Hopefully, will solve this elusive problem. Thanks.

by ron k.

I've installed the sound drivers the manufacturer supplies for that onboard audio. Why are you installing Realtek drivers if the manufacturer's drivers don't specify Realtek?

by rovoco

Ron -

The Asus M2N-MX SE Series motherboard does
have a Realtek audio chip. The Asus support
CD contains the original Realtek driver. I
reinstalled the original driver and it did
not solve the problem. I then installed the
latest Realtek HD Audio driver. No luck.
Ergo, it is not driver related, but rather,
somthing is getting messed up on shutdown.

by cmatthews

If not, check with autoruns under drivers to see if there are conflicts (2 similar or related loading at once)

Also on a biz PC, don't use the goofy mixer provided by Realtek, the basic sndvol32 in the systray is all that's needed.

Other keys to check before shutdown:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce

by rovoco

Have tried all your last suggestions. No
luck. There are three users on this PC.
I confirmed that permissions settings, when
applied, remain the same regardless of who
the user is. The PC does not even have to be
shut down or restarted to cause the wave
volume setting to go to zero. Just logging
out and then logging in as a new user will
set the wave volume to zero. It does not
appear to be driver related. I installed
the latest driver for the MOBD from the Asus
site with no change. Other audio functions
are fine (CD playback, Windows Media Player,
Internet audio). I may resort to using the
restore function, beginning before the
problem occurred and walking forward to
later dates until the problem shows up. Then
I may get a clue as to whether an MS Update
may have caused it. I can then remove the
MS update files one at a time at that point
and test. If I locate the bad update file I
can delete it and lock it out in MS update
so it won't cause the problem again. Agree?

by rovoco

Thanks for the link. I downloaded and
installed the Realtek ALC662 driver, but it
did not solve the problem. See my latest
response to this thread and let me know what
you think. Thanks for taking the time to
respond. This is really weird!

by cmatthews

..In all occurrences (minus the video), compare the name and file versions (at bottom)..

You might also take a gander at program files and sort folders by date. If a guilty user de-installed something, an empty folder could have been left behind time-stamped just before things started to go south.

by timothyfryer

I have a Toshiba laptop L305D-S5893 running a Realtek onboard chipset with the same problem. Thought I would add that I downgraded from Vista to XP Pro SP3 with NO UPDATES or HOTFIXES. I don't let MSUPDATE corrupt my registry any more because the first thing I do on an install now is turn off Windows Update. Not sure why the wave volume slider goes to zero but it isn't because of a hotfix or update, at least not in my case.

This discussion is closed to new replies.