Discussion Locked

macafee causing startup problems

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When macafee is installed my pc will not start up properly. Right before windows desktop comes up the screen will go black and freeze. Nothing will work. If I press f8 the safe mode screen doesnt come up and the screen still stays black but this somehow forces windows to continue loading. When it comes up everything works fine. If macafee isnt installed the computer boots up fine.

18 replies

by Member 20548194

if you check disks you install and download you can remove mcafee from the boot up. go to start run regedit, then go h-key local machine, software,microsoft,windows, current version,run, on the right ut will show you everything that boots with your system remove mcaffe from here.also from run serveices, and run once if present.

by dmiles

This could be a incompatiibility issue with McAfee definition file and the Scan engine.
Try disabling scan at startup,go to the McAfee web site and update the latest scan engine and dat files,apply to system then,reboot and if this clears up problem,you can then reapply scan at startup.

by searogue

Hi, once you get windows up, try changing the following on the line in your autoexec.bat file - it will be something like this : C:\PROGRA~1\NETWOR~2\MCAFEE~1\SCAN.EXE C:@IF ERRORLEVEL 1 PAUSE --- change where it says scan.exe to bootscan.exe ---

had to do this myself on my pc at home, works fine now.

HTH,

Bets regards,

Tony

by mphoffar

I have to agree with answer 2, in that the dats are probobly at fault here, but I would just get the latest superdat file from www.nai.com (then product updates) and update the MCAfee with that.

There was an instance a while back where a newer dat file without the latest engine update would cause the system to freeze tighter then a drum.

Good luck to you

Mark

by glfnetm

Could be a couple of things - the others amy be correct but what are the specs of the system you are running? Ran into a probelm with Win9x machines with 16MB ram that this ahppened to . McAfee also has a list of troubleshooting tips re this problem at their web site.

by earnest

If you are running v4.5 ensure you have sp1 loaded. You may have to contact macfee to get path and login.

Bo

by mancca74

You might want to remove the initial scan alltogether. This can be done by removing the lines calling on it in your autoexec.bat file. if you just temporarily want to disable the just type REM in front of the lines. This way you can easily revert back if you want to.

This discussion is closed to new replies.