Discussion Locked

Machine not logging onto the network

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hello, I have a slight problem with one of the machines on the network. It will not log on to the network.When u turn on the machine as usual u will get the prompt for the username and password and the domain is correct, and when u log in with the username and password it comes up with an error, saying wrong information provided and u wont be able to access the network resources, the username and password are correct. Now I know the network card is working because I am able to ping to the network and that work fines. Can someone please help me with this little dilemna. Thanks

7 replies

by tamj123

remove the computer from domain, join in the workgroup first, then restart the computer. rejoin the Domain after computer restart.

by joncr

Is there anything in the logs? Its a good place to start if the above answer doesn't work. Another thing to do is to remove the machine from the domain and recreate a new entry.

by allen

If the machine is runing win9X and the server is runing NT, then usually the machine does not log on, the user does. if the user can logon from another machine then go back to the machine. ping is a tcp/ip command that is used mostly for trubleshooting TCP/IP.If itworks, that does not mean that other protocols do. windos does all the work with NetBEUI protocol. the NetBUEI might not be bind with the NIC. make sure that this protocol is installed on the clinet machine by checking the network property. if everything there, I would uninstall the nic physically the reboot, then installe it again. in many cases that should work.

This discussion is closed to new replies.