Software

Ask something
Question Locked

Making Network PC Invisible via LAN

0 helpful
6 replies

by rafal 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What do I need to set in order for one of my PCs not to show up when network is browsed?

I'll add that the network is a domain based setup and I still want to have a remote access to the PC. I just don't want regular users seeing the PC in the network browser.

6 replies

by ashij

You can use the command (from command prompt)

NET CONFIG SERVER /HIDDEN:YES

This will make sure that your computer/shares are not "advertised" over the LAN. This does not however block access to the computer.

To unhide your computer put "NO" instead of "YES" in above command

by rafal

Just out of curiosity, after using the command when should I see the results? Instantly? After a reboot? After a server reboot?

by ashij

Hi! Rafal,

This setting is applied instantly, however you should know that it DOES NOT BLOCK anybody from accessing your computer

when you run that command the information is saved in the registry here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
the value for "hidden" (DWORD) gets set to 0 on NO and 1 on YES

This is supposed to take affect immidiately.

EDIT: However the time it takes for this, also depends on your LAN refresh speed (anywhere from a couple of hours to 24 hrs.)

Ash

by rafal

What seems to work is:
Disabling "Computer Browser" and "Server" services. For some situations these services may be necessary, but for what I'm using the PCs for this does the trick.

by ashij

Thanks for sharing the solution. People rarely do that these days, but, it's good for users who are in trouble and looking for solutions.

This discussion is closed to new replies.