5 replies
by cuziyq
Memory Parity Errors can often be caused by conflicting IRQ's. Sometimes, the BIOS on some systems may reserve an IRQ, but not use it, so Windows does not flag it as a conflict in Device Manager (HP is notorious for this). When you plug in the modem, suddenly IRQ 10 conflicts and trips a parity error.
Usually, the USB controller uses IRQ 10. Try changing it in Device Manager to IRQ 9, 11, or 12. If those resources are already in use, try going into the BIOS and see if you can determine what device wants IRQ 10 and disable it.
Also, modems create a "virtual COM port" which also requires an IRQ (of course, you would never see it until you plugged in the modem). Maybe when you plug in the modem, this virtual COM port and the USB port are suddenly trying to use the same IRQ, also causing a parity error.
Either way, I'd say this is some sort of IRQ conflict, and you should try troubleshooting it accordingly.
by sitman2k
by sitman2k
thanks.
the problem turned out to be a motherboard
problem.
Question closed.
by sitman2k
by sitman2k
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending