5 replies
by lancelittle84 Accepted solution
by animatech Accepted solution
Did you formated the drive and did a clean install?
Did you checked that your PC can handle winxp?
I also don't understand the part with the new drive are you installed XP on 1 drive and then plugged in the 2nd drive?
Was it loading before you have plugged in the 2nd drive.
Did you make sure that the 2nd drive is set to slave and not master?
Please provide more details
by lancelittle84 Accepted solution
by animatech Accepted solution
I hope you made yourself a backup of all your important data just in case this wont work.
Please check the below link to read about upgrading 98 to XP and understand the difference between the 2 http://tinyurl.com/kqn3
If you just upgraded you should still have the WIN98 folder you can use the recover option - see http://tinyurl.com/28ffnd - If you have a full system backup.
Also you should have been prompt with an option to save your system files during the upgrade.
If you choose to do that please refer to http://tinyurl.com/3almaa.
Hope this helps.
by animatech Accepted solution
It might be worth a while to do a clean install of win xp on the new HDD you have and make the old 1 a slave drive.
This way you will be able to at least access that drive and save any personal data if you did not have a backup before.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending